Keeping your world up and running.®

Fluke 805 FC Vibration Meter

The reliable, repeatable, accurate way to check bearings and overall vibration and stay in contact with your team using Fluke Connect with ShareLive™

Fluke 805 FC Vibration Meter with Fluke Connect® Assets
  • Fluke 805 FC Vibration Meter with Fluke Connect® Assets
  •  Fluke Connect® on a mobile device
  • Fluke Connect® Asset Health Status over time
  • Fluke 805 FC Vibration Meter
Overview
Features
Reviews
Specs
Models
Accessories
Resources
  • The reliable, repeatable, accurate way to check bearings and overall vibration

    Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

  • What makes the Fluke 805 FC the most reliable vibration screening device available?

    • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
    • Consistent data quality at both low and high frequency ranges
    • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
    • Exportable data via USB
    • Trending in Microsoft® Excel using pre-built templates
    • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
    • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
    • Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud
    • Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ Share-Live™ video call*
    • Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
    • Temperature measurement with Spot IR Sensor increases diagnostic capabilities
    • On-board memory holds and saves up to 3,500 measurements
    • External accelerometer support for hard to reach locations
    • Flashlight for viewing measurement locations in dark areas
    • Large screen with high resolution for easy navigation and viewing

    *Within provider’s wireless service area

  • Specifications
    Low frequency range (overall measurement) 10 Hz to 1,000 Hz
    High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz
    Severity levels Good, satisfactory, unsatisfactory, unacceptable
    Vibration limit 50 g peak (100 g peak-peak)
    A/D converter 16-bit
    Signal to noise ratio 80 dB
    Sampling rate Low frequency: 20,000 Hz
    High frequency: 80,000 Hz
    Real time clock backup Coin battery
    Sensor
    Sensitivity 100 mV g ± 10%
    Measurement range 0.01 g to 50 g
    Low frequency range (overall measurement) 10 Hz to 1,000 Hz
    High frequency range 4,000 Hz to 20,000 Hz
    Resolution 0.01 g
    Accuracy At 100 Hz ± 5% of measured value
    Amplitude Units
    Acceleration g, m/sec²
    Velocity in/sec, mm/sec
    Displacement mils, mm
    Infrared Thermometer (Temperature Measurement)
    Range -20 °C to 200 °C (-4 °F to 392 °F)
    Accuracy ±2 °C (4 °F)
    Focal length Fixed, at ~3.8 cm (1.5")
    External Sensor
    Note: Fluke supports but does not provide external sensors
    Frequency range 10 Hz to 1,000 Hz
    Bias voltage (to supply power) 20 V dc to 22 V dc
    Bias current (to supply power) Maximum 5 mA
    Firmware
    External interfaces USB 2.0 (full speed) communication
    Data capacity Database on internal flash memory
    Upgrade Through USB
    Memory Up to 3,500 measurements
    Radiated Emission
    Electrostatic discharge: burst Standard EN 61000-4-2
    Electromagnetic interference Standard EN 61000-4-3
    RE Standard CISPR 11, Class A
    Environmental
    Operating temperature -20 °C to 50 °C (-4 °F to 122 °F)
    Storage temperature -30 °C to 80 °C (-22 °F to 176 °F)
    Operating humidity 10% to 95% RH (non-condensing)
    Operating/storage altitude Sea level to 3,048 meters (10,000 feet)
    IP rating IP54
    Vibration limit 500g peak
    Drop test 1 meter
    General Specifications
    Battery type AA (2) Lithium Iron Disulfide
    Battery life 250 measurements
    Size (L x W x H) 24.1 cm x 7.1 cm x 5.8 cm
    (9.5 in x 2.8 in x 2.3 in)
    Weight 0.40 kg (0.89 lb)
    Connectors USB mini-B 7-pin, external sensor jack (SMB connector)
    • Models
      Model Name Description  
      Fluke 805 FC Fluke 805 FC Vibration Meter
       

      Includes:

      • USB cable
      • Storage case
      • Belt holster
      • Quick reference guide
      • CD-ROM (includes MS Excel template and documentation)
      • Two (2) AA batteries
    • Compatible Products
      Model Name Description  
      Fluke 805ES Fluke 805ES

Fluke Connect is not available in all countries.

©2015 Fluke Corporation. All trademarks are the property of their respective owners. Smart phone, wireless service and data plan not included with purchase. First 5 GB of storage is free. Compatible with iPhone 4x and up running iOS 7 or higher; iPad (in an iPhone frame on iPad); Samsung Galaxy S4 running Android 4.3.x or higher and Samsung Galaxy S, Nexus 5, HTC One and One M8 running Android™ 4.4.x or higher. Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

×