Keeping your world up and running.®

Fluke 190-504/S 500 MHz ScopeMeter® Test Tool

5 GS/s sampling rate, 500 MHz bandwidth with 4 input channels and DMM for electronic field service applications.

Get a Free Demo
Overview
Features
Reviews
Specs
Models
Accessories
Resources
    • Why choose the new 500 MHz four-channel ScopeMeter® test tool?

      A faster sample rate and higher bandwidth means greater accuracy and clarity. The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients.

  • See more, fix more with the four-channel CAT IV rated Fluke ScopeMeter 190-504/S

    The Fluke ScopeMeter 190 Series II combines the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.

    The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

    • Four electrically isolated inputs
    • CAT III 1000 V / CAT IV 600 V safety rated
    • Choose from 60 MHz, 100 MHz, 200 MHz or 500 MHz bandwidth models
    • Fast sampling rate, up to 5 GS/s with up to 200 ps resolution (Depending on model and channels used)
    • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
    • Dedicated 999 Count digital multimeter.
    • Four meter measurements via scope BNC inputs in four-channel models
    • Connect-and-View™ continuous auto-trigger, single shot, pulse width, and video triggering
    • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
    • TrendPlot, trend measurement readings for up to 22 days
    • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
    • IP-51 rated for dust and drip proof to withstand harsh environments
    • Isolated USB ports for memory devices and PC connectivity
    • Li-Ion battery for extended operating timespan:
      • 190-X04, four-channel models up to 7 hour (BP291 included standard)
      • Charge spare battery using optional external battery charger EBC290
    • Easy-access battery door to make it easy to swap batteries
    • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

    Gain four times the diagnostic power plus CAT IV safety rating

    TheFluke ScopeMeter 190-504/S portable scopes are double-insulated four-channel floating oscilloscopes, safety rated for measurements in CAT III 1000V/CAT IV 600V environments.

    Three-dimensional testing for industrial systems »

    Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:

    • Circuit voltage/current overloading
    • Signal timing measurements and synchronization issues
    • Attenuation/input impedance mismatch
    • Signal fluctuation/drift
    Three-dimensional testing for industrial systems

    Three-phase testing for diagnosing VSD, power inverters, and converters »

    • Test for harmonics, transients and loads at the three-phase power input
    • Troubleshoot DC to AC converters for faulty IGBT gates or filter circuits
    • Test PWM output for reflections and transients or voltage unbalance
    Three-phase testing for diagnosing VSD, power inverters, and converters

    Safely measure from mV to kV

    Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

    Take on the harshest conditions with the only IP-51-rated according to IEC60529 scope on the market

    Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable and accurate performance every time you need them.


    Take on the harshest conditions with the only IP-51-rated according to IEC60529 scope on the market


    Built in digital multimeter to quickly and conveniently perform precise measurements

    Built-in digital multimeter 2-channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include VDC, VAC, VAC + DC, resistance, continuity and diode test. Measure current and temperature using a suitable shunt, probe or adapter with wide range of scaling factors. The Fluke-190-504/S, 4 channel models incorporate four meter measurements via the 4 channel scope BNC inputs.


    Built in digital multimeter to quickly and conveniently perform precise measurements


    Work a full shift on a single charge

    New high-performance batteries take advantage of Li-Ion technology to keep you going strong for up to seven hours. And with the easy-access battery door you can make battery swaps fast.


    Work a full shift on a single charge


    Capture and share waveforms easily with new USB connectivity

    Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveforms, screen captures or instrument setups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.


    Capture and share waveforms easily with new USB connectivity


    See a stable display instantly with connect-and-view™ triggering

    Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.


    See a stable display instantly with connect-and-view™ triggering


    Record up to 48 hours of high-resolution waveforms with ScopeRecord™

    ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches.

    • Stores events like motion profiles, UPS power up signals, power supply AC and DC signals, and motor start-ups
    • With the Stop-on-Trigger mode, the ScopeMeter 190-504/S automatically recognizes a power failure and stores the waveform data preceding it
    • With the waveform zoom you can look at the smallest details like individual power cycles

    Record up to 48 hours of high-resolution waveforms with ScopeRecord™

    Record up to 22 days with Trendplot™ paperless recorder to find intermittent faults

    Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:

    • Plotting minimum and maximum peak values and average over time up to 22 days
    • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults
    Record up to 22 days with Trendplot™ paperless recorder to find intermittent faults
  • Specifications
    Bandwidth 500 MHz
    Number of channels 500 MHz: 4 channels
    Real-time sample rate 5 GS/s
    Inputs 4x BNc input scope plus DMM input
    Independently floating isolated inputs Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
    Input sensitivity 2 mV-100 V/div plus variable attentuation
    Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
    Trigger source 4x BNC input
    Glitch capture 8 ns
    Scope measurements Cursor: 7
    Automatic: 30
    Maximum record length ScopeRecord mode: 30,000 pts per input
    Scope mode: 10,000 pts per input
    Persistence Digital persistence giving analog oscilloscope-like waveform decay
    Waveform compare Waveform reference with automatic Pass/Fail testing
    DMM Specification
    Meter inputs BNC inputs function as DMM input
    Maximum resolution 999 counts
    Measurements VDC, VAC rms, VAC + DC rms, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
    Memory Screen + Setup: 30
    Recording: 10
    Display 153 mm full color LCD with fast update rate
    Environmental Specifications
    Operating temperature 0°C to 40°C Including Batteries
    0°C to 50°C Excluding Batteries
    Storage temperature -20°C to +60°C
    Operating altitude Up to 2,000 m (6666 ft) for CAT IV 600 V/ CAT III 1000 V
    Up to 3,000 m (10,000 ft) for CAT III 600 V/ CAT II 1000 V
    Safety Specifications
    Electrical safety 1,000 V CAT III/600 V CAT IV (EN61010-1)
    Mechanical and General Specifications
    Size 270 x 190 x 70 mm
    Weight 2.2 kg
    Warranty Three-years on main instrument
    Li-Ion battery BP 291 (4800mAh)
    Included Accessories
    VPS410 Voltage Probe Sets (one red, one blue)
    BC190 Battery Charger/mains Adapter
    BP291, 4800 mAh Li-Ion battery
    Handstrap (affixed to instrument)
    Hangstrap
    Multi-Language User Manuals on CD-Rom
    FlukeView ScopeMeter® demo package (restricted functionality)
    USB Interface Cable
    Warranty One year on accessories
    • Models
      Model Name Description  
      Fluke 190-504/S Fluke 190-504/S 500MHz ScopeMeter® Test Tool
       

      Includes:

      • Color ScopeMeter® 500 MHz
      • 4 channels
      • DMM/Ext.input
      • BC190/820 (Universal) 100 V to 240V ± 10%
      • C290 Hard-shell Carrying Case
      • SW90W FlukeView for ScopeMeter Test Tool
      • Windows® software
    • Accessory Kits
      Model Name Description  
      Fluke MA190 Fluke MA190 Accessory Kit for Medical and Video Applications Fluke Store
    • Automotive Accessories
      Model Name Description  
      Fluke SCC298 Fluke SCC298 Automotive Troubleshooting Kit for Fluke 190 Series II
    • Batteries, Chargers & Adapters
      Model Name Description  
      Fluke BC190 Fluke BC190 Line Voltage Adapter / Battery Charger
      Fluke BP290 Fluke BP290 2400 mAh High Capacity Li-Ion Battery for Fluke 190-Series-II
      Fluke BP291 Fluke BP291 4800 mAh High Capacity Li-Ion Battery for Fluke 190-Series-II
      Fluke EBC290 Fluke EBC290 External Battery Charger for BP290 and BP291 Fluke Store
    • CarePlans
      Model Name Description  
      Fluke CarePlans Fluke Handheld Instruments CarePlans Fluke Store
    • Cases & Holsters
      Model Name Description  
      Fluke C195 Fluke C195 Case
      Fluke C290 Fluke C290 Hard Shell Protective Carrying Case for Fluke 190-series II
    • Clips
      Model Name Description  
      Fluke HC200 Fluke HC200 Hook Clip set 2 red, 2 gray Fluke Store
    • Options
      Model Name Description  
      Fluke SCC290 Fluke FlukeView Software for ScopeMeter (SW90W) and Carrying Case (C290) Kit
      Fluke HH290 Fluke HH290 Hanging Hook for ScopeMeter 190-Series II
    • Software
      Model Name Description  
      Fluke SW90W Fluke SW90W FlukeView ScopeMeter Software
    • Test Leads, Probes & Clips
      Model Name Description  
      Fluke AS400 Fluke AS400 Probe Accessory Extension Set 1 Fluke Store
      Fluke RS400 Fluke RS400 Probe Accessory Replacement Set
      Fluke RS500 Fluke RS500 Probe Set
      Fluke TL175 Fluke TL175 TwistGuardTM Test Leads Fluke Store
      Fluke VPS101 Fluke VPS101 – Voltage Probe Set, 1:1, one black
      Fluke VPS410 Fluke VPS410 Probe-sets, 10:1 (1 red, 1 blue, 1 grey, 1 green)
      Fluke VPS410-II-B Fluke VPS410-II-B ScopeMeter® Voltage Probe Set
      Fluke VPS410-II-G Fluke VPS410-II-G ScopeMeter® Voltage Probe Set
      Fluke VPS410-II-R Fluke VPS410-II-R ScopeMeter® Voltage Probe Set
      Fluke VPS410-II-V Fluke VPS410-II-V ScopeMeter® Voltage Probe Set
      Fluke VPS420-B Fluke VPS420-B ScopeMeter® Voltage Probe Set
      Fluke VPS420-G Fluke VPS420-G ScopeMeter® Voltage Probe Set
      Fluke VPS420-R Fluke VPS420-R ScopeMeter® Voltage Probe Set
      Fluke VPS420-V Fluke VPS420-V ScopeMeter® Voltage Probe Set
      Fluke VPS510-B Fluke VPS510-B ScopeMeter® Compact Probe
      Fluke VPS510-G Fluke VPS510-G ScopeMeter® Compact Probe
      Fluke VPS510-R Fluke VPS510-R ScopeMeter® Compact Probe
      Fluke VPS510-V Fluke VPS510-V ScopeMeter® Compact Probe
    • Test Probes
      Model Name Description  
      Fluke TRM50 Fluke TRM50 Coaxial Feed-through BNC Male to BNC Female Cable Terminator
      Fluke VPS220-G Fluke VPS220-G Voltage Probe Set, 100:1, One Grey Fluke Store
      Fluke VPS220-R Fluke VPS220-R Voltage Probe Set, 100:1, One Red Fluke Store
    • Related Products
      Model Name Description  
      Fluke 190-062 Fluke 190-062 ScopeMeter® Test Tool
      Fluke 190-062/S Fluke 190-062/S ScopeMeter® Test Tool
      Fluke 190-102 Fluke 190-102 ScopeMeter® Test Tool
      Fluke 190-102/S Fluke 190-102/S ScopeMeter® Test Tool
      Fluke 190-104 Fluke 190-104 ScopeMeter® Test Tool
      Fluke 190-104/S Fluke 190-104/S ScopeMeter® Test Tool
      Fluke 190-202 Fluke 190-202 ScopeMeter® Test Tool
      Fluke 190-202/S Fluke 190-202/S ScopeMeter® Test Tool
      Fluke 190-204 Fluke 190-204 ScopeMeter® Test Tool
      Fluke 190-204/S Fluke 190-204/S ScopeMeter® Test Tool
      Fluke 190-502 Fluke 190-502 500 MHz ScopeMeter® Test Tool
      Fluke 190-502/S Fluke 190-502/S ScopeMeter® Test Tool
      Fluke 190-504 Fluke 190-504 500MHz ScopeMeter® Test Tool
    • Manuals
      Title  
      190 Series II 用户手册 Download
      190 Series II Users Manual Download
      190 Series II Users Manual Download
      190 Series II Käyttöohje Download
      190 Series II Mode d'emploi Download
      190 Series II Bedienungshandbuch Download
      190 Series II Manuale per l’uso Download
      190 Series II Users Manual Download
      190 Series II 사용자 설명서 Download
      190 Series II Instrukcja użytkownika Download
      190 Series II Manual do usuário Download
      190 Series II Руководство пользователя Download
      190 Series II Manual de uso Download
      190 Series II Kullanım Kılavuzu Download
      190 Series II Users Manual Supplement Download
      190 Programmers Guide Download
      190 Series II CE Declaration of Conformity Download
      190 Series II CE Declaration of Conformity Download
      190 Series II CSA Certificate of Conformity Download
      190 Series II Statement of Memory Volatility Download
      190 Series II, Fluke 190-062, -102, -104, -202, -204, -502, -504 Service Manual Download
      190 Series II, Fluke 190-062, -102, -104, -202, -204, -502, -504 Service Manual Supplement Download
      EBC290 Instruction Sheet Download
      HH290 Instruction Sheet Download
    • Brochures
      Title  
      Introducing the complete 190 Series II ScopeMeter® Test Tool Download