ScopeMeter® 120 Series: Three-in-one simplicity
The compact ScopeMeter® 123 is the rugged solution for industrial troubleshooting and installation applications. It’s a truly integrated test tool, with oscilloscope, multimeter and 'paperless' recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.
ScopeMeter® 120 Series : As simple as one-two-three
- Dual-input 40 MHz or 20 MHz digital oscilloscope
- Two 5,000 counts true-RMS digital multimeters
- Automatic measurements
- A dual-input TrendPlot™ recorder
- Connect-and-View™ trigger simplicity for hands-off operation
- Shielded test leads for oscilloscope, voltage, resistance and continuity measurements
- Up to 7 hours battery operation
- 600 V CAT III safety certified
- Optically-isolated interface for PC connection
In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The ScopeMeter 123/S meets today’s need of simultaneously measuring and checking waveforms. The unique Connect-and-View™ triggering automatically displays stable waveforms of virtually any signal. It really is as easy as one-two-three!
A three-in-one tool
Dual-input measurement shows both meter reading and waveform at the same time today’s need of simultaneously
The ScopeMeter 123/S combines a 40 or 20 MHz dual input digital storage oscillo-scope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 123/S is the only tool you’ll need.
One test lead measures all
Check the starting capacitor of a motor using the ScopeMeter 123/S
High frequency waveform-, meter-, capacitance- and resistance-measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.
The confidence to do a better job
Open the measure menu and select from 26 scope- and meter-measurements
Working under time pressure and in cramped or difficult to reach locations means you want to focus on the job at hand, not on the test tool in your hand. Which is why the ScopeMeter 123/S has Connect-and-View automatic triggering.You don’t have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.
Battery powered mobility
Up to seven hours of battery operation frees you from mains outlets for true on-the-move working. The handheld format and the weight of just 1.2 kg, make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments.
Floating measurements, safety certified
While conventional oscilloscopes can only make measurements referenced to power line ground, the ScopeMeter 123/S makes floating measurements so there is no risk of an accidental ground short circuit when making a connection. The ScopeMeter 123/S and the included shielded test leads are safety certified for measurements on 600 V CAT III industrial power systems. And using the VPS40 probe, measurements up to 1000 V CAT II re fully supported! Via the optically isolated RS-232 or USB interface, the ScopeMeter 123/S can be safely connected to a printer for direct print-out or to a PC for later analysis and documentation using FlukeView software.
Connect-and-View™ triggering for an instant, stable display
Connect-and-View captures even the most complex motor drive signals
Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke’s unique Connect-and-View recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal – including motor drive and control signals – without you touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test points in quick succession.
Use TrendPlot™ to help find intermittents, fast
Cursors and zoom help you analyze the captured TrendPlot
The toughest faults to find are those that happen only once in a while: intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You may not be around to see it – your Fluke ScopeMeter test tool will. In this “paperless” recorder mode, you can plot the minimum and maximum peak values and average over time – up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase – with time and date stamp – to help lead you to the cause of those faults quickly.
FlukeView® Software for documenting, archiving and analysis
FlukeView® for Windows® helps you get more out of your ScopeMeter test tool by:
- Documenting – transfer waveforms, screens and measurement data to a PC. Print or import the data into your report.
- Add user text to individual ScopeMeter test tool settings – providing guidance to the operator when recalling a set-up.
- Archiving – create a library of waveforms with your comments for easy reference and comparison. Store complete Replay cycles for analysis of waveform changes. Store complete memory content of the ScopeMeter instrument on your PC for back-up purposes.
- Waveform Compare – store reference waveforms on the PC, or send a reference back to the ScopeMeter test tool for waveform comparison and “Pass/Fail” testing.
- Analysis – use cursors, perform spectrum analysis or export data to other analysis programs. ScopeMeter test tools are connected to a PC via an optically-isolated RS-232 or USB interface cable.
Specifications Oscilloscope bandwidth 20 MHz Dual input true RMS meter Vdc, Vac, Vac+Vdc, Ohms,Continuity, Diode-test Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset TrendPlot recording Automatic vertical scaling and time compression
Display the actual, MIN, MAX and AVG reading
Real-time sample rate 25 MS/s Equivalent sampling rate Up to 1.25 GS/s Inputs and digitizers 2 Timebase range 10 ns - 1 min/div Input sensitivity 5 mV - 500 V/div Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Video, External Glitch capture 40 ns Scope measurements Automatic measurements: 26 (all instruments) On top Maximum record length 512 min/max pts per input Memory 10 screens and setups Environmental Specifications Operating temperature 0 °C to 50 °C Storage temperature -20 °C to +60 °C Operating altitude 3,000 m Safety Specifications Electrical safety 600V CAT III (EN61010-1) Mechanical and General Specifications Size 232 x 115 x 50 mm Weight 1.2 kg Warranty 3-years on main instrument
1-year on accessories
Battery life 7 hrs using NiMH RS232/USB interface Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC
Model Name Description Fluke 123 Industrial ScopeMeter® Hand Held Oscilloscope
- Industrial ScopeMeter Handheld Oscilloscope (20 MHz)
- STL120 Shielded Test Lead Set
- HC120 Hook Clips
- BB120 Shielded BNC Adapter
- AC120 Alligator Clips
- PM8907 Battery Charger/Line Voltage Adapter
- BP120MH – NiMH Battery Pack (Installed)
- Getting Started Booklet
- User Manual (CD-ROM), Multi-lingual
Model Name Description Fluke SCC128 Automotive Troubleshooting kit (120 Series)
Batteries, Chargers & Adapters
Cables & Hardware
Model Name Description Fluke G3P-Group3 Gold CarePlan
- Models covered: 43B/003, 123/003, 124/003, 125/003, and 1555
- Extends warranty from three to five years and includes five annual NIST traceable calibrations with data
Fluke Store Fluke S3P-Group3 Silver CarePlan
- Models covered: 43B/003, 123/003, 124/003, 125/003, and 1555
- Extends warranty from three to five years
Cases & Holsters
Model Name Description Fluke 80i 110s AC/DC Current Clamp Fluke Store Fluke i1000s AC Current Probe Fluke Store Fluke i1010 AC/DC Current Clamp Fluke Store Fluke-i3000s AC Current Clamp Fluke Store Fluke i3000s Flex 24 AC Current Clamp, 610 mm (24 in.) Fluke Store Fluke i3000s Flex 36 AC Current Clamp, 915 mm (36 in.) Fluke Store Fluke i30s AC/DC Current Clamp Fluke Store Fluke-i310s Current Probe Fluke Store Fluke i400s AC Current Clamp Fluke Store Fluke i410 AC/DC Current Clamp Fluke Store Fluke i5S AC Current Clamp Fluke Store
Model Name Description Fluke FOM Fiber Optic Meter
HVAC IAQ Tools
Model Name Description Fluke 80PK 22 SureGrip™ Immersion Temperature Probe Fluke Store Fluke 80PK 24 SureGrip™ Air Temperature Probe Fluke Store Fluke 80PK 26 SureGrip™ Tapered Temperature Probe Fluke Store Fluke 80PK 3A Surface Probe Fluke Store Fluke 80PK 8 Pipe Clamp Temperature Probe Fluke Store Fluke 80T 150UA Universal Temperature Probe Fluke Store Fluke 80T 150UA Universal Temperature Probe Fluke Store Fluke 80TK Thermocouple Module Fluke Store
Model Name Description Fluke H900 Test Lead Holder Fluke Store Fluke STL120 Shielded Test Leads Fluke STL90 Shielded Test Lead Set Fluke Store Fluke TAS90 Shielded Test Lead Accessory Set Fluke Store Fluke TL220 SureGrip™ Industrial Test Lead Set Fluke Store Fluke TL221 SureGrip™ Test Lead Extension Set Fluke Store Fluke TL224 SureGrip™ Insulated Test Leads Fluke Store Fluke TL40 Retractable Tip Test Lead Set Fluke TL71 Premium Test Lead Set Fluke Store Fluke TL81A Deluxe Electronic Test Lead Kit Fluke Store
Test Leads, Probes & Clips
Model Name Description Fluke DP120 Differential Probe Fluke Store Fluke ITP120 Optically Isolated External Trigger Probe Fluke Store Fluke PM8918/301 ScopeMeter Low Pass Filter Probe Fluke TL910 Electronic Test Probes Fluke Store Fluke TP912 Replacement Tips for TL910 Fluke Store Fluke TP920 Test Probe Adapter Set Fluke Store Fluke VPS201 100:1 Voltage Probe Set Fluke VPS250 2.5 m Voltage Probe Set 75 MHz Fluke VPS40 10:1 Voltage Probe with 2 mm tip 40 MHz (one black)
Title 123/124 Series Users Manual Download 123/124 Series Getting Started Download 123, 124 Statement of Memory Volatility Download 120 Series Software Reference Manual Download 125 Statement of Memory Volatility Download 125 Users Manual Download 125 Getting Started Download 123 Service Manual Download 123/124 Service Manual Download 123/124/125 Service Manual Download
Title Fluke 190 and 120 Series ScopeMeter Test Tools Family Brochure Download
Title Who sets the rules for electrical testing and safety? Download Verifying hydraulic control system operation Download Using a Fluke ScopeMeter 125 to troubleshoot FOUNDATION fieldbus installations Download Fluke ScopeMeter 125 test tools helps solve a Modbus RS-485 timing problem Download Troubleshooting made simple with Fluke 190C Series ScopeMeter test tools Download Verifying CAN bus signals with a Fluke ScopeMeter 120 Series Download A first look at digital storage oscilloscopes Download Measuring short interrupts on the mains with a Fluke ScopeMeter 190 Series Test Tools Download