What is continuity?

Keeping your world up and running.®

×
Digital multimeters emit an audible signal to confirm when continuity exists.
 

What is continuity?

Continuity is the presence of a complete path for current flow. A closed switch that is operational, for example, has continuity.

A continuity test is a quick check to see if a circuit is open or closed. Only a closed, complete circuit (one that is switched ON) has continuity.

During a continuity test, a digital multimeter sends a small current through the circuit to measure resistance in the circuit.

A meter with a continuity beeper briefly sounds off when it detects a closed circuit. The level of resistance needed to trigger the beeper varies by meter, but most will indicate continuity with a measurement between 0-50 ohms.

The audio signal speeds the measuring process since technicians do not have to look at the meter during testing.

Continuity testing determines:

Continuity testing should be attempted only when voltage is NOT present in the circuit being tested.

Safety

Always unplug the device or turn off the main circuit breaker before attempting a continuity test. Ensure that all capacitors are safely discharged.

If voltage contact IS made while in continuity, most meters provide overload protection in ohms up to the meter’s voltage rating. For most Fluke instruments, that is 1000 V ac.

Reference: Digital Multimeter Principles by Glen A. Mazur, American Technical Publishers.

Was this helpful?
Yes
No
Recommended Products
Recommended Resources
 
©2016 Fluke Corporation. Specifications subject to change without notice. 6004271

Electricity Fundamentals

Explaining electricity’s fundamental components

Recommended Products
Recommended Resources