The Fluke 830 Laser Shaft Alignment Tool is the ideal test tool to precision-align rotating shafts in your facility.
It's a known fact - all rotating machinery is susceptible to misalignment. If you're still using rulers and dial indicators to ensure your rotating machinery is properly aligned, you could be losing thousands of dollars per year in replacement bearing costs, hours of unnecessary repair time, and crippling unplanned downtime, not to mention taking years off your machine's useful life.
The Fluke 830 Laser Shaft Alignment tool is easy-to-use, giving you fast, accurate and actionable answers that will keep your plant up and running. When it comes to laser shaft alignment, data is good but answers are better.
Unlike using the straightedge method or dial indicators the Fluke 830 performs the complicated alignment calculations for you, meaning you'll have the answers you need to quickly align your machine and get your plant up and running fast. An enhanced user interface provides easy to understand results that don't require extensive alignment knowledge and the unique "All-in-One" result screen that shows you both coupling results and feet corrections (vertical and horizontal) in real terms making it easy to take corrective action.
Since machine downtime is costly, test repeatability is critical. The Fluke 830 uses a patented single laser precision alignment system that provides accurate and repeatable measurement results so you can be assured you're addressing misalignment problems properly.
- Single laser measurement technology means reduced errors from backlash resulting in better data accuracy
- Intuitive guided user interface quickly and easily complete machine alignments
- Compass measurement mode enables flexible, reliable and repeatable measurements using an activated electronic inclinometer
- Dynamic machine tolerance check provides continuous evaluation of alignment adjustments so you know when your machine in acceptable range
- Unique extend mode handles gross misalignment by virtually increasing laser detector size
- Data protection ensures your data is there when you need it with auto save and resume capability
Computer CPU Intel XScale PXA270 running at 312 MHz Memory 64 MB RAM, 64 MB flash Display Type: TFT, transmissive (sunlight-readable), 65,535 colors, backlit LED Integrated light sensor for automated adjustment of the brightness to the display according to the lighting conditions which extends battery life Resolution: 320 x 240 pixel;
Dimensions: 89 mm (3.5 in) diagonal
Keyboard elements: Setup, measure, diagnose, menu, clear, enter, back keys, navigation cursor cross, alphanumeric keyboard and on/off button LED indicators Multicolor LED for laser status and alignment condition Multicolor LED for battery status Power supply Integrated Lithium-ion polymer rechargeable battery: 7.4 V/ 2.6 Ah (for optional computer) with typical operating time of 17 hours (based upon an operating cycle of 33% measurement, 33% computation and 33% 'sleep' mode) External interface USB host and USB device (slave) Integrated wireless communication, Class 1, transmitting power 100 mW RS232 (serial) for sensor AC adapter/charger socket Environmental protection IP 65 (dustproof and water spray resistant), shockproof Relative humidity 10% to 90% Operating temperature -10°C to 50°C (14°F to 122°F) Storage temperature -20°C to 60°C (-4°F to 140°F) Dimensions 220 mm x 165 mm x 45 mm (8.7 in x 6.5 in x 1.8 in) Weight 742 g (1.64 lb) Sensor Measurement principle Coaxial, reflected laser beam Environmental protection IP 67 (submersible, dustproof) Ambient light protection Yes Storage temperature -20°C to 80°C (-4°F to 176°F) Operating temperature 0°C to 55°C (32°F to 131°F) Dimensions 107 mm x 70 mm x 49 mm (4 1/4 in x 2 3/4 in x 2 in) Weight 177 g (6 1/2 oz) Laser Type: Ga-Al-As semiconductor laser Wavelength (typical) 675 nm (red, visible) Safety class: Class 2, FDA 21 CFR 1000 and 1040 Beam power: < 1 mW Safety precautions: Do not look into laser beam Detector Measurement area: unlimited, dynamically extendible
(U.S. Patent 6,040,903)
Resolution: 1 μm; Accuracy (avg): > 98% Inclinometer Measurement range: 0° to 360°; Resolution: < 1° Prism Type 90° roof prism; Accuracy (avg): > 99% Environmental protection IP 67 (submersible, dustproof) Operating temperature -20°C to 60°C (-4°F to 140°F) Storage temperature -20°C to 80°C (-4°F to 176°F) Dimensions 100 mm x 41 mm x 35 mm (4 in x 1 5/8 in x 1 3/8 in) Weight 65 g (2 1/2 oz.) Carrying case Dimensions 565 mm x 343 mm x 127 mm (22 1/4 in x 13 1/2 in x 5 in) Weight, including all standard parts 5.6 kg (12.3 lb)
Model Name Description Fluke 830 Fluke 830 Laser Shaft Alignment Tool Includes:
- Fluke 830 Laser Alignment Tool
- Laser sensor
- Laser prism
- Chain-type mounting bracket with 150 mm support posts (2x)
- 300 mm support post (4x)
- Micro fiber cleaning cloth
- Sensor cable
- PC cable
- USB drive
- USB drive cable
- Tape measure
- Wireless Bluetooth® module
- Power adapter
- Instruction kit and carrying case
Title 830 Users Manual Download 830 Users Manual Download 830 Users Manual Download 830 Users Manual Download 830 Users Manual Download 830 Users Manual Download 830 Users Manual Download 830 Users Manual Download 830 Users Manual Supplement Download 830 CE Declaration of Conformity Download 830 Quick Reference Guide Download 830 Safety Sheet Download 830 Safety Sheet Download 830 Safety Sheet Download 830 Safety Sheet Download 830 Safety Sheet Download 830 Safety Sheet Download 830 Safety Sheet Download 830 Safety Sheet Download 830 Safety Sheet Supplement Download 830 Statement of Memory Volatility Download 830/Cable Quick Reference Guide Download
Title Fluke 830 Shaft Alignment Brochure Download
Title Fluke 830 Laser Shaft Alignment Tool Data Sheet Download