Fluke brings its test and measurement equipment expertise to the foodservice industry with contact and non-contact temperature measurement solutions. The Fluke FoodPro Plus thermometer provides a complete temperature measurement and monitoring solution for foodservice professionals. It includes one useful temperature inspection tool, which is designed to enable foodservice professionals to quickly and accurately measure food product temperatures and to help detect potential food safety problems.
The Fluke FoodPro Plus combines the same infrared surface temperature scanner, as well as a probe thermometer and integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals.
The Fluke FoodPro Plus thermometer is hand-washable and features unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.
- Receiving: Use FoodPro Plus thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
- Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures.
- Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements.
- Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs.
- Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste.
Fluke FoodPro Plus Food Safety Thermometer
The Fluke FoodPro Plus combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings. An integrated countdown timer with alarm monitors line checks as well as cooking and cooling intervals.
Includes all of the FoodPro features, plus the following:
- Built-in fold-out probe for measuring internal food temperatures
- Probe temperature range -40 to 150ºC
- Countdown timer to monitor cooking, cooling and HACCP exposure times
- Backlit display for clear readings in poorly lit areas
- MAX temperature displayed for quick reference
Infrared Specifications Temperature -35°C to 275°C Accuracy (Assumes ambient operating temperature of 23°C ±2°) Between 0°C and 65°C: ±1°C Below 0°C: ±1° ±0.1 degree/degree Above 65°C: ±1.5% of reading Response time < 500 ms after initial reading Spectral response 8-14 microns Emissivity Pre-set for foodservice applications Distance to spot size/Optical resolution (D:S) 2.5:1 @ 90% energy, typical Typical working range (target illumination) ≈ 25 mm to 250 mm Minimum target size 12 mm ø Illumination to IR channel offset 13 mm Probe Specifications Temperature -40°C to 150°C Accuracy (Assumes ambient operating temperature of 23°C ±2°) Between –5°C and 65°C: ±0.5°C Below –5°C: ±1°C Above 65°C: ±1% of reading Response time 7-8 seconds (3 time constants) Probe dimensions Diameter: 3.0 mm Length: 90 mm Sensor type Thin-film platinum, class A, Resistance Thermal device (RTD) Operational Specifications Repeatability Within accuracy specifications of the unit Ambient operating range 0°C to 50°C Relative humidity 90% (±5%) RH non condensing @ 30°C Storage temperature -20°C to 60°C Weight 150 g (with battery) Dimensions 165 x 32 x 50 mm Power, battery life 9 V alkaline Battery life Alkaline, 10 hours minimum @ 23°C Target illumination High brightness LED Display resolution 4 digits, 0.1°C Displayhold (7seconds) Yes LCD backlit display Yes Temperature display 4 digits, 0.1°C resolution Maximum temperature displayed Yes Timer Yes Environmental data IP54 sealing (hand-washable, non-submersible) Other Specifications (both) Calibration certificate Calibration accuracy with NIST and DKD traceability Standards Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible) Certifications CE NSF Warranty 2 years Options/Accessories Replacement probe At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice.
Model Name Description Fluke FP Plus Fluke FoodPro Plus Infrared Food Thermometer
- Built-in contact probe
- 9 V alkaline battery
- Quick start guide
- Operator's guide
- Soft carry pouch
A Field Replacement Probe (see below) is available as an optional accessory.
Title FoodPro Plus دليل المستخدم Download FoodPro Plus 用户手册 Download FoodPro Plus Brugsanvisning Download FoodPro Plus Handleiding Download FoodPro Plus Users Manual Download FoodPro Plus Käyttöohje Download FoodPro Plus Mode d'emploi Download FoodPro Plus Bedienungshandbuch Download FoodPro Plus Manuale per l’uso Download FoodPro Plus ユーザーズ･マニュアル Download FoodPro Plus Manual do usuário Download FoodPro Plus Руководство пользователя Download FoodPro Plus Manual de uso Download FoodPro Plus Användarhandbok Download FoodPro Plus Users Manual Supplement Download FoodPro CE Declaration of Conformity Download FoodPro Plus CE Declaration of Conformity Download Foodpro Plus Quick Reference Guide Download FoodPro Plus Statement of Memory Volatility Download FoodPro Statement of Memory Volatility Download Foodpro Users Guide Download Foodpro Users Guide Supplement Download
Title Product Training Presentation Download