Keeping your world up and running.®

Fluke 62 MAX+/T+PRO/1AC IR Thermometer, T+PRO Voltage Continuity Tester and Voltage Detector Kit

The Fluke 62 MAX+ combined with the T+PRO voltage continuity tester and the 1-AC-II voltage detector, provides everything you need to solve problems quickly.

Overview
Features
Reviews
Specs
Models
Resources
  • The rugged Fluke 62 MAX+ IR thermometer teamed with the full featured T+PRO voltage continuity tester and the easy-to-use 1-AC-II non-contact voltage detector, has everything you need to solve problems quickly. Use the IR thermometer to test for overheating in electrical devices, next use the electrical test tools to learn more about the problem safely and conveniently.

  • Fluke 62 MAX+ Infrared Thermometer

    • Dust and water-resistant: IP54 rated.
    • Rugged: 3-meter (9.8-foot) drop tested.
    • Ergonomically designed: Completely redesigned for a more natural hand fit.
    • Distance to spot: 12:1.
    • Dual lasers: Identifies area to be measured.
    • Large, backlit display: Makes data easier to read, even in dark areas.

    Fluke T+PRO Voltage and Continuity Tester

    • 3 forms of AC/DC voltage detection: light, sound, and vibration.
    • Extra heavy-duty, replaceable test leads.
    • CAT IV 600, CAT III 1000 V safety rated.
    • Continuity beeper.

    Fluke 1AC-II VoltAlert™ Non-Contact Voltage Detector

    • Voltbeat™ technology and continuous self-test, so always know it’s working.
    • Upon detection of voltage, tip glows and beeper sounds.
    • Voltage detection of 90 to 1000 VAC.
    • CAT IV 1000 V for added protection.

    Fluke C115 Soft Case

    • Lightweight soft case to provide optimal protection and accessory storage.
  • Fluke 62 MAX+ Infrared Thermometer

    Specifications
    Temperature range -30°C to 650°C (-22°F to 1202°F)
    Accuracy ±1.0°C or ±1.0% of reading, whichever is greater
    -10°C to 0°C: ±2.0
    -30°C to -10°C: ±3.0
    Response time (95%) < 300 ms (95% of reading)
    Spectral response 8 to 14 microns
    Emissivity 0.10 to 1.00
    Optical resolution 12:1 (calculated at 90% energy)
    Display resolution 0.1°C (0.2°F)
    Repeatability of readings ±0.5% of reading or < ±0.5°C (1°F), whichever is greater
    Power AA battery
    Battery life 8 hours with laser and backlight on
    Physical Specifications
    Weight 255 g (8.99 oz)
    Size 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
    Operating temperature 0°C to 50°C (32°F to 122°F)
    Storage temperature -20°C to 60°C (-4°F to 140°F), (without battery)
    Operating humidity 10% to 90% RH non-condensing at 30°C (86°F)
    Operating altitude 2000 meters above mean sea level
    Storage altitude 12,000 meters above mean sea level
    IP rating IP 54 per IEC 60529
    Drop test 3 meters
    Vibration and shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
    EMC EN 61326-1:2006 EN 61326-2:2006
    Standards and agency approval Compliance EN/IEC 61010-1: 2001
    Laser safety FDA and EN 60825-1 Class II

    Fluke T+PRO Electrical Testers

    Specifications
    Temperature Operating -10°C to 55°C (14°F to 131°F)
    Storage -30°C to 60°C (-22°F to 140°F)
    Relative humidity 0°C to 30°C (32°F to 86°F): 90%
    30°C to 40°C (86°F to 104°F): 75%
    40°C to 50°C (104°F to 122°F): 45%
    Altitude Operating 2,000 m (approx. 6,561.6 ft)
    Storage 10,000 m (approx. 32,808.4 ft)
    Battery type/life AAA (2); 40 hours
    Shock, vibration Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
    Safety ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV
    Compliance to NFPA 70E1
    AC bandwidth 45 Hz to 66 Hz
    Maximum working voltage 1000 V AC/DC
    Maximum measurable voltage 600 V AC/DC
    Duty cycle Indefinitely for voltages up to 240 V
    For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off
    For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
    Voltage hazard LED LEDs turn on at voltages > 30 V AC/DC ±35%
    LED voltage indication levels 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V
    LED voltage indication levels for Canadian version 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 347 V, 480 V, 600 V
    LEDs LEDs turn on between 90% and 100% of the indicated voltage on the LED, except for the 12 V LED which turns on between 50% and 100%
    LCD accuracy on T+PRO only AC voltage ±(3% rdg + 2 digits)
    DC voltage ±(2% rdg + 2 digits)
    Resistance ±(5% rdg + 3 digits)
    LCD resolution 0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V
    0.01 kΩ for resistance measurement (For T+PRO Only)
    GFCI test current 100 V - 150 V @ 6 mA - 9 mA AC, 150 V - 240 V < 12 mA
    Standard input test current < 5 mA
    Size (H x W x L) 1.3 x 2.15 x 7.6 in (3.3 x 5.46 x 19.3 cm)
    Weight 9.9 oz (0.28 kg)
    1. When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.

    Fluke 1AC-II VoltAlert

    Specifications
    Operating principle Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
    Voltage sensing ranges Nominally, 90 VAC to 1000 VAC or 200 VAC to 1000 VAC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
    Detector tip style Blade or round, depending on model
    Light source One high intensity red LED
    Agency approvals c CSA us, CE, C-Tick
    Safety rating 1000 V, CAT IV
    IP rating IP 40
    Operating temperature -10°C to 50°C
    Operating humidity ranges 0% to 95% (0°C to 30°C)
    0% to 75% (30°C to 40°C)
    0% to 45% (40°C to 55°C)
    Operating altitude 3000 meters
    Batteries 2 AAA alkaline batteries included
    Product does not respond to random electrostatic discharge.
    • Models
      Model Name Description  
      Fluke 62 MAX+/T+PRO/1AC Fluke 62 MAX+/T+PRO/1AC IR Thermometer, T+PRO Voltage Continuity Tester and Voltage Detector Kit
       

      Includes:

      • Fluke 62 MAX+ IR Thermometer
      • Fluke T+Pro Electrical Tester
      • Fluke 1AC II VoltAlert Voltage Detector
      • C115 Soft Case
    • Manuals
      Title  
      1AC II Instruction Sheet Download
      1AC II Instruction Sheet Supplement Download
      1AC-II Statement of Memory Volatility Download
      62 Max/62 Max+ Calibration Information Download
      T+ and T+ PRO, T+ CAN and T+PRO CAN CSA Certificate of Conformity Download
      T+ and T+ PRO, T+ CAN and T+PRO CAN CSA Certificate of Conformity Supplement Download
    • Application Notes
      Title  
      A million and one uses for voltage detectors Download
      Understanding capacitive voltage sensors Download
      When things are tight, reach for the Fluke T5 Download
      Who sets the rules for electrical testing and safety? Download
    • Data Sheets
      Title  
      Fluke 1AC II Data Sheet Download
      Fluke T5-600 Data Sheet Download
    • Demos
      Title  
      Fluke 62 Max and 62 Max+ Handle Without Care Demo Download