Keeping your world up and running.®

Fluke Calibration P3000 Pneumatic Deadweight Testers

The combined pressure and vacuum deadweight tester provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one primary standard.

Fluke Calibration P3000 Pneumatic Deadweight Testers
Overview
Features
Specs
Models
Resources
  • This versatile instrument provides calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one extremely accurate yet easy to use primary standard. A selector valve converts the unit from pressure to vacuum mode without the need to exchange pistons. Units are manufactured to the highest standards with certified accuracies traceable to International Standards Laboratories such as the National Institute of Standards and Technology (NIST). These piston/cylinder type pneumatic standards provide excellent stability, repeatability and accuracy. An optional built-in hand pump can be added for both pressure and vacuum generation.

    • 0.015% of reading accuracy standard (0.008% optional)
    • 1-30 inHg vacuum (0.03-1 bar vacuum)
    • 3-500 psi (0.2-35 bar) pressure
    • inH2O and mbar ranges available
    • Series 3 non-magnetic stainless steel weights
    • Units can be trimmed to local gravity FOC
  • Accuracy
    Accuracy1 ±0.015% of reading (±0.008% optional)
    1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
    Mass and PCU Materials of Construction
    Standard weight material Series 3 non-magnetic austenitic stainless steel
    Weight density 7.8 g/cm³
    Optional fractional weights Solution heat treated aluminum
    Weight density 2.7 g/cm³
    Models P3011, P3012, P3013, P3022, P3023, P3025 (V) Piston material Ceramic
    Cylinder material Martensitic steel
    Coefficient of expansion 11 ppm/°C
    Models P3014, P3015, P3025 (P) P3031, P3032 (P & V) Piston material Tungsten carbide
    Cylinder material Martensitic steel
    Coefficient of expansion 16.5 ppm/°C
    Model P3016 Piston material Tungsten carbide
    Cylinder Material Tungsten carbide
    Coefficient of Expansion 11 ppm/°C
    General
    Test port adaptors 1/8, 1/4, 3/8 and ½ NPT or BSP
    Instrument weight 24 lbs
    Instrument size (W x D x H) 17.5 x 12 x 8.5
    Mass set weight (typical) 65 lbs
    Minimum Standard Weight Increments
    P3012, P3022 Pressure 1 inH2O, (5 mbar)
    P3013, P3023 Pressure 2 inH2O, (10 mbar)
    P3014, P3015, P3025 Pressure 1 psi, (0.1 bar)
    P3016, P3031, P3032 1 psi, (0.1 bar)
    P3011, P3022, P3023, P3025 Vacuum 0.2 inHg (10 mbar)
    Optional Fractional Weights
    P3014, P3015, P3025 Pressure 0.1 psi (0.01 bar)
    Built-in Hand Pumps
    Pressure mode Max pressure 300 psi (20 bar)
    Vacuum mode To 90% vacuum
    Operating Fluid for Liquid Lubricated Models
    55-655 Mineral oil (standard)
    Krytox For oxygen-safe applications (optional)
    Options
    PressCal Software Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments.
    Krytox As operating fluid for liquid lubricated gas operated models.
    • Models
      Model Name Description  
      Fluke P3011-4-P Fluke Calibration P3011-4-P Pneumatic Deadweight Testers
      Vacuum range 3 to 100 kPa
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Vacuum operated – single PCU
      • Built-in pump optional
      Fluke P3011-6-P Fluke Calibration P3011-6-P Pneumatic Deadweight Testers
      Vacuum range 30 to 1,000 mbar
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Vacuum operated – single PCU
      • Built-in pump optional
      Fluke P3011-8-P Fluke Calibration P3011-8-P Pneumatic Deadweight Testers
      Vacuum range 1 to 30 inHg
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Vacuum operated – single PCU
      • Built-in pump optional
      Fluke P3011-9-P Fluke Calibration P3011-9-P Pneumatic Deadweight Testers
      Vacuum range 30 to 760 mmHg
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Vacuum operated – single PCU
      • Built-in pump optional
      Fluke P3012-4-P Fluke Calibration P3012-4-P Pneumatic Deadweight Testers
      Pressure range 1.5 to 1000 kPa
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3012-6-P Fluke Calibration P3012-6-P Pneumatic Deadweight Testers
      Pressure range 15 to 1,000 mbar
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3012-7-P Fluke Calibration P3012-7-P Pneumatic Deadweight Testers
      Pressure range 400 inH20
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3013-4-P Fluke Calibration P3013-4-P Pneumatic Deadweight Testers
      Pressure range 3 to 200 kPa
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3013-6-P Fluke Calibration P3013-6-P Pneumatic Deadweight Testers
      Pressure range 30 to 2,000 mbar
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3013-7-P Fluke Calibration P3013-7-P Pneumatic Deadweight Testers
      Pressure range 12 to 800 inH2O
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3014-1-P Fluke Calibration P3014-1-P Pneumatic Deadweight Testers
      Pressure range 0.2 to 10 bar
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3014-2-P Fluke Calibration P3014-2-P Pneumatic Deadweight Testers
      Pressure range 0.2 to 10 kgf/cm²
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3014-3-P Fluke Calibration P3014-3-P Pneumatic Deadweight Testers
      Pressure range 3 to 150 psi
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3014-4-P Fluke Calibration P3014-4-P Pneumatic Deadweight Testers
      Pressure range 20 to 1,000 kPa
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3014-5-P Fluke Calibration P3014-5-P Pneumatic Deadweight Testers
      Pressure range 0.02 to 1 MPa
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      Fluke P3015-1-P Fluke Calibration P3015-1-P Pneumatic Deadweight Testers
      Pressure range 0.2 to 35 bar
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      • Built-in pump optional
      Fluke P3015-2-P Fluke Calibration P3015-2-P Pneumatic Deadweight Testers
      Pressure range 0.2 to 35 kgf/cm²
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      • Built-in pump optional
      Fluke P3015-3-P Fluke Calibration P3015-3-P Pneumatic Deadweight Testers
      Pressure range 3 to 500 psi
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      • Built-in pump optional
      Fluke P3015-4-P Fluke Calibration P3015-4-P Pneumatic Deadweight Testers
      Pressure range 20 to 3,500 kPa
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      • Built-in pump optional
      P3015-5-P Fluke Calibration P3015-5-P Pneumatic Deadweight Testers
      Pressure range 0.02 to 3.5 MPa
       

      Includes:

      • P3000 Series Single Pressure Model
      • Air operated – single PCU
      • Built-in pump optional
      Fluke P3022-4-P Fluke Calibration P3022-4-P Pneumatic Deadweight Testers
      Pressure range 1.5 to 100 kPa
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 3 to 100 kPa
      • Built-in pump optional
      Fluke P3022-6-P Fluke Calibration P3022-6-P Pneumatic Deadweight Testers
      Pressure range 15 to 1,000 mbar
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 30 to 1,000 mbar
      • Built-in pump optional
      Fluke P3022-7-P Fluke Calibration P3022-7-P Pneumatic Deadweight Testers
      Pressure range 5 to 400 inH2O
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 1 to 30 inHg
      • Built-in pump optional
      Fluke P3023-4-P Fluke Calibration P3023-4-P Pneumatic Deadweight Testers
      Pressure range 3 to 200 kPa
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 3 to 100 kPa
      • Built-in pump optional
      Fluke P3023-6-P Fluke Calibration P3023-6-P Pneumatic Deadweight Testers
      Pressure range 30 to 2,000 mbar
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 30 to 1,000 mbar
      • Built-in pump optional
      Fluke P3023-7-P Fluke Calibration P3023-7-P Pneumatic Deadweight Testers
      Pressure range 12 to 800 inH2O
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 1 to 30 inHg
      • Built-in pump optional
      Fluke P3025-1-P Fluke Calibration P3025-1-P Pneumatic Deadweight Testers
      Pressure range 0.2 to 35 bar
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 30 to 1,000 mbar
      • Built-in pump optional
      Fluke P3025-2-P Fluke Calibration P3025-2-P Pneumatic Deadweight Testers
      Pressure range 0.2 to 35 kgf/cm²
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU 
      • Vacuum Range 30 to 760 mmHg
      • Built-in pump optional
      Fluke P3025-3-P Fluke Calibration P3025-3-P Pneumatic Deadweight Testers
      Pressure range 0.2 to 35 kgf/cm²
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU 
      • Vacuum Range 30 to 760 mmHg
      • Built-in pump optional
      Fluke P3025-4-P Fluke Calibration P3025-4-P Pneumatic Deadweight Testers
      Pressure range 20 to 3,500 kPa
       

      Includes

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 3 to 100 kPa
      • Built-in pump optional
      Fluke P3025-5-P Fluke Calibration P3025-5-P Pneumatic Deadweight Testers
      Pressure range 0.02 to 3.5 MPa
       

      Includes:

      • P3000 Series Vacuum and Dual Vacuum/Pressure Model
      • Air operated - dual PCU
      • Vacuum Range 3 to 100 kPa
      • Built-in pump optional
    • Manuals
      Title  
      P3000 Series Users Manual Download
      P3031 & P3032 Users Manual Download
      Pressurements PressCal Users Manual Download