Keeping your world up and running.®

Fluke 754 Documenting Process Calibrator-HART

Combining HART communication in a documenting process calibrator, the 754 is the ideal tool for calibrating and troubleshooting HART instrumentation.

Get a Free Demo
Fluke 754 Documenting Process Calibrator with HART Communication
  • Fluke 754 Documenting Process Calibrator with HART Communication
  • Fluke 754 Documenting Process Calibrator with HART Communication in a hand-held device
  • Fluke 754 Documenting Process Calibrator with HART Communication with carrying case
  • Fluke 754 Documenting Process Calibrator with HART Communication calibration a pressure transmitter
Overview
Features
Reviews
Specs
Models/Accessories
Resources
  • You’re going to love what we’ve done with your calibrator.

    The 754 is everything you needed and wished for in the 744 and more! HART communication capability is combined to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.

    The 754 does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You’ll fall in love with the new improved graphical screen, Li-Ion battery for longer life, USB port and new accessories to complete the package.

    For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.

    HART Capabilities

    The 754 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers most of the communication capabilities of a HART communicator.

    To create a seamless/paperless calibration management systen coinsider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.

    The Fluke 754 Documenting Process Calibrator-HART: Work smarter. Work faster.

  • Work smarter. Work faster.

    The 754 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. The 754 also features a powerful built in HART® interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

    • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
    • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
    • Power transmitters during test using loop supply with simultaneous mA measurement
    • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
    • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
    • Holds up to a full week of downloaded procedures and calibration results.
    • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
    • Easy to use
    • Three year warranty
    • Bright white dual display. Read both sourced and measured parameters simultaneously.
    • Multi lingual interface
    • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
    • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
    • Delivered with DPC/Track Sample software.
    • Compatible with many Asset Management software packages.

    HART Capabilities
    The 754 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 375 HART communicator.

    • Requires no external box or second tool for everyday HART calibration and maintenance.
    • Offers fast HART communication.
    • Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator.
    • Works with multiple masters, burst mode, and multi-drop configurations.
    • Is easy to update as additional instruments are added and new HART versions are released.
    • Interrogate to determine device type, manufacturer, model, tag.
    • Reconfigure the sensor mapping of dual sensor temperature transmitters.
    • Read HART PV function and smart transmitter digital output while measuring analog mA output.
    • Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings.
    • Re-label smart transmitters by reading and writing to the HART tag field.

    Versatile HART Protocol support

    Manufacturer Pressure instruments Temperature instruments Coriolis instruments
    ABB/Kent-Taylor 600T 658T1  
    ABB/Hartmann & Braun Contrans P1,
    AS 800 Series
       
    Endress & Hauser CERABAR S,
    CERABAR M,
    DELTABAR S
    TMT 1221,TMT 1821,
    TMT 1621
     
    Foxboro Eckardt   TI/RTT201  
    Foxboro/Invensys I/A Pressure    
    Fuji FCX
    FCXAZ
    FRC  
    Honeywell ST3000 STT25T1,
    STT25H1
     
    Micro Motion     2000
    2000 IS
    9701
    9712
    9739
    Moore Products   3441  
    Rosemount 1151
    2088
    3001C
    3051, 3051S
    3044C
    644
    3144
    3244, 3144P
     
    Siemens SITRANS P DS
    SITRANS P ES
       
    SMAR LD301 TT3011  
    Viatran I/A Pressure    
    Wika UNITRANS T32H1  
    Yokogawa EJA YTA 110, 310
    and 320
     

    1Sensor Trim not supported

    The 754 supports the commands contained in HART protocol Version 5.7. With 2 MB of memory, the 754 supports a substantial set of HART instructions:

    • Universal commands provide functions that are implemented in all field devices, for example, read manufacturer and device type, read primary variable (PV), or read current output and percent of span.
    • Common practice commands provide functions that are common to many but not all field devices, for example read multiple variables, set damping time, or perform loop test.
    • Device-specific commands provide functions that are unique to a particular field device, for example sensor trim.

    HART Operating Modes Supported

    • Point to Point operation , the most commonly used mode, connects the 754 to a single HART device in a 4-20 mA loop.
    • In Multi-Drop mode , several HART instruments can be bussed together. The 754 searches for each, identifies addresses in use, and allows you to select the instrument for calibration and related operations.
    • In Burst Mode, the HART instrument transmits bursts of data without waiting to be interrogated by a master unit. The 754 can take transmitters out of burst mode during test or calibration, then later restore them to burst mode.

    Pressure Modules

    Covers virtually any pressure application including gauge, differential, dual (compound), absolute, and vacuum.

    • Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.
    • Rugged urethane molded cases protect the modules from rough handling and harsh conditions.
    • Features internal temperature compensation from 0° to 50°C for full accuracy performance.
    • Includes NIST-traceable calibration certificate.
    • Modules can be calibrated locally, helping to control costs.

    A family of 29 optional pressure modules provides pressure calibration and measurement capabilities. Twenty-eight modules are available, with basic accuracy specs to 0.05%. Ranges start at 0 – 1 inH20 (0 – .25kPa) and go to 0 – 10,000 psi (0 – 70,000 kPa). Additional information about pressure modules is available on the Pressure Modules Home Page.

    Automated Procedures

    Allow you to quickly set up powerful, automated calibration procedures for linear transmitters, DP flow transmitters, and one- and two-point limit switches. Simply select the appropriate measure and/or source functions and fill out the procedure template. The 750 Series does the rest. It quickly performs the test, calculates the errors, and displays the final results, highlighting out of tolerance points.

    Custom Units

    Enable you to map one unit to another, such as mV to °C or °F. Allows you to use the Fluke 750 Series with millivolt output accessories such as the Fluke 80T-IR Temperature Probe, and to document tests using non-supported units such as parts per million or revolutions per minute.

    User-entered Values

    Enables technicians to record calibration results that were sourced and/or measured by other devices such as panel meters or readout-only devices.

    Limit Switch Calibration

    Procedures perform fast, automated calibration of one and two-point limit switches for voltage, current, temperature, and pressure.

    Differential Pressure Flow Instrument Calibration

    Routines use a square root function to directly calibrate DP flow instruments.

    Additional Features
    Multifunctional

    Calibrate temperature, pressure, voltage, current, resistance, and frequency. Since it both measures and sources, you can troubleshoot and calibrate all with one rugged tool.

    Powerful, yet easy to use

    The easy-to-follow menu-driven display guides you through any task. Get up to speed in minutes, not days. Programmable calibration routines enable you to create and run automated as-found/as-left procedures to ensure fast, consistent, calibrations.

    Records and documents results

    To support your ISO-9000 or regulatory standards the Fluke 754 captures your calibration results, eliminating the need to juggle a pen and pad in the field. The USB interface lets you transfer the results to a PC, thus saving the time of having to manually transcribe them when you return to the shop.

    Truly hand-held

    Small enough to fit easily into a tool bag and to use in tight spaces. Runs an entire shift on a rechargeable Li-ion battery pack.

    Rugged and reliable

    Count on Fluke's rugged design to deliver top accuracy and reliability in harsh environments. Overmolded urethane case stands up to rough handling in industrial environments.

    Bright white display

    Lets you read your results in any kind of light. Backlight has three (3) settings.

    Soft keys

    Provide one-touch access to enhanced functions such as task lists, automated procedures, scaling, min/max, stepping and ramping, and review memory.

    Three operating modes

    Measure, Source, or simultaneous Measure/Source, - enable technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.

    Multi-lingual interface

    Displays instructions in English, French, German, Spanish, and Italian.

    Built-in algebraic calculator

    With four functions-plus square root-stores, recalls, and performs calculations required for setting up instruments or evaluating data in the field. Use it to set the source function to a calculated value. There's no need to carry a pencil and paper or a separate calculator.

    Programmable measurement delay

    Inside automated procedures permits calibrating instruments that respond slowly.

  • Measurement Accuracy
    Voltage DC Range/Resolution 1 Year 2 Years
    100.000 mV 0.02% + 0.005 mV 0.03% + 0.005 mV
    3.00000 V 0.02% + 0.00005 V 0.03% + 0.00005 V
    30.0000 V 0.02% + 0.0005 V 0.03% + 0.0005 V
    300.00 V 0.05% + 0.05 V 0.07% + 0.05 V
    Voltage AC
    3.000 V (40 Hz to 500 Hz) / 0.001 V 0.5% + 0.002 V 1.0% + 0.004 V
    30.00 V (40 Hz to 500 Hz) / 0.01 V 0.5% + 0.02 V 1.0% + 0.04 V
    300.0 V (40 Hz to 500 Hz) / 0.1 V 0.5% + 0.2 V 1.0% + 0.2 V
    Current DC 30.000 mA 0.01% + 5 uA 0.015% + 7 uA
    110.00 mA 0.01% + 20 uA 0.015% + 30 uA
    Resistance 10.000 Ω 0.05% + 50 mΩ 0.07% + 70 mΩ
    100.00 Ω 0.05% + 50 mΩ 0.07% + 70 mΩ
    1.0000 kΩ 0.05% + 500 mΩ 0.07% + 0.5 Ω
    10.000 kΩ 0.1% + 10 Ω 0.15% + 15 Ω
    Frequency 1.00 to 110.00 Hz / 0.01 Hz 0.05 Hz
    110.1 to 1100.0 Hz / 0.1 Hz 0.5 Hz
    1.101 to 11.000 kHz / 0.001 kHz 0.005 kHz
    11.01 to 50.00 kHz / 0.01 kHz 0.05 kHz
    Source Accuracy
    1 Year 2 Years
    Voltage DC 100.000 mV 0.01% + 0.005 mV 0.015% + 0.005 mV
    1.00000 V 0.01% + 0.00005 V 0.015% + 0.0005 V
    15.0000 V 0.01% + 0.0005 V 0.015% + 0.0005 V
    Current DC 22.000 mA (source) 0.01% + 0.003 mA 0.02% + 0.003 mA
    Current sink (simulate) 0.02% + 0.007 mA 0.04% + 0.007 mA
    Resistance 10.000 Ω 0.01% + 10 mΩ 0.015% + 15 mΩ
    100.00 Ω 0.01% + 20 mΩ 0.015% + 30 mΩ
    1.0000 kΩ 0.02% + 0.2 Ω 0.03% + 0.3 Ω
    10.000 kΩ 0.02% + 3 Ω 0.03% + 5 Ω
    Frequency 0.1 to 10.99 Hz 0.01 Hz
    0.01 to 10.99 Hz 0.01 Hz
    11.00 to 109.99 Hz 0.1 Hz
    110.0 to 1099.9 Hz 0.1 Hz
    1.100 to 21.999 kHz 0.002 kHz
    22.000 to 50.000 kHz 0.005 kHz
    Technical Data
    Data log functions Measure functions Voltage, current, resistance, frequency, temperature, pressure
    Reading rate 1, 2, 5, 10, 20, 30, or 60 readings/minute
    Maximum record length 8000 readings (7980 for 30 or 60 readings/minute)
    Ramp functions Source functions Voltage, current, resistance, frequency, temperature
    Rate 4 steps/second
    Trip detect Continuity or voltage (continuity detection not available when sourcing current)
    Loop power function Voltage Selectable, 26 V
    Accuracy 10%, 18 V minimum at 22 mA
    Maximum current 25 mA, short circuit protected
    Maximum input voltage 50 V DC
    Step functions Source functions Voltage, current, resistance, frequency, temperature
    Manual step Selectable step, change with arrow buttons
    Autostep Fully programmable for function, start delay, stepvalue, time per step, repeat
    Environmental Specifications
    Operating temperature -10°C to +50°C
    Storage temperature -20°C to +60°C
    Dust/water resistance Meets IP52, IEC 529
    Operating altitude 3000 m above mean sea level (9842 ft)
    Safety Specifications
    Agency approvals CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993
    Mechanical and General Specifications
    Size 136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)
    Weight 1.2 kg (2.7 lb)
    Batteries Internal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh
    Battery life >8 hours typical
    Battery replacement Replace without opening calibrator; no tools required
    Side port connections Pressure module connector
    USB Connector to interface to your PC
    Digital instrument (HART) connector
    Connection for optional battery charger/eliminator
    Data storage capacity 1 week of calibration procedures results
    90 day specifications The standard specification interval for the 750 Seriesare 1 and 2 years.
    Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2.
    Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant.
    Temperature, Resistance Temperature Detectors
    Degrees or % of reading - Type (α) Range °C Measure °C1
    1 year 2 year
    100 Ω Pt (385) -200 to 100
    100 to 800
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    200 Ω Pt (385) -200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    500 Ω Pt (385) -200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    1000 Ω Pt (385) -200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    100 Ω Pt (3916) -200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    100 Ω Pt (3926) -200 to 100
    100 to 630
    0.08°C
    0.02% + 0.06°C
    0.16°C
    0.04% + 0.12°C
    10 Ω Cu (427) -100 to 260 0.2°C 0.4°C
    120 Ω Ni (672) -80 to 260 0.1°C 0.2°C
    Source current Source °C Allowable current2
    1 year 2 year
    1 mA 0.05°C
    0.0125% + 0.04°C
    0.10°C
    0.025% + 0.08°C
    0.1 mA to 10 mA
    500 μA 0.06°C
    0.017% + 0.05°C
    0.12°C
    0.034% + 0.10°C
    0.1 mA to 1 mA
    250 μA 0.06°C
    0.017% + 0.05°C
    0.12°C
    0.034% + 0.10°C
    0.1 mA to 1 mA
    150 μA 0.06 C
    0.017% + 0.05°C
    0.12 C
    0.034% + 0.10°C
    0.1 mA to 1 mA
    1 mA 0.05°C
    0.0125% + 0.04°C
    0.10°C
    0.025% + 0.08°C
    0.1 mA to 10 mA
    1 mA 0.05°C
    0.0125% + 0.04°C
    0.10°C
    0.025% + 0.08°C
    0.1 mA to 10 mA
    3 mA 0.2°C 0.4°C 0.1 mA to 10 mA
    1 mA 0.04°C 0.08°C 0.1 mA to 10 mA
    1. For two and three-wire RTD measurements, add 0.4°C to the specifications.
    2. Supports pulsed transmitters and PLCs with pulse times as short as 1 ms
    Temperature, Thermocouples
    Type Source °C Measure °C Source °C
    1 year 2 years 1 year 2 years
    E -250 to -200 1.3 2.0 0.6 0.9
    -200 to -100 0.5 0.8 0.3 0.4
    -100 to 600 0.3 0.4 0.3 0.4
    600 to 1000 0.4 0.6 0.2 0.3
    N -200 to -100 1.0 1.5 0.6 0.9
    -100 to 900 0.5 0.8 0.5 0.8
    900 to 1300 0.6 0.9 0.3 0.4
    J -210 to -100 0.6 0.9 0.3 0.4
    -100 to 800 0.3 0.4 0.2 0.3
    800 to 1200 0.5 0.8 0.3 0.3
    K -200 to -100 0.7 1.0 0.4 0.6
    -100 to 400 0.3 0.4 0.3 0.4
    400 to 1200 0.5 0.8 0.3 0.4
    1200 to 1372 0.7 1.0 0.3 0.4
    T -250 to -200 1.7 2.5 0.9 1.4
    -200 to 0 0.6 0.9 0.4 0.6
    0 to 400 0.3 0.4 0.3 0.4
    B 600 to 800 1.3 2.0 1.0 1.5
    800 to 1000 1.0 1.5 0.8 1.2
    1000 to 1820 0.9 1.3 0.8 1.2
    R -20 to 0 2.3 2.8 1.2 1.8
    0 to 100 1.5 2.2 1.1 1.7
    100 to 1767 1.0 1.5 0.9 1.4
    S -20 to 0 2.3 2.8 1.2 1.8
    0 to 200 1.5 2.1 1.1 1.7
    200 to 1400 0.9 1.4 0.9 1.4
    1400 to 1767 1.1 1.7 1.0 1.5
    C 0 to 800 0.6 0.9 0.6 0.9
    800 to 1200 0.8 1.2 0.7 1.0
    1200 to 1800 1.1 1.6 0.9 1.4
    1800 to 2316 2.0 3.0 1.3 2.0
    L -200 to -100 0.6 0.9 0.3 0.4
    -100 to 800 0.3 0.4 0.2 0.3
    800 to 900 0.5 0.8 0.2 0.3
    U -200 to 0 0.6 0.9 0.4 0.6
    0 to 600 0.3 0.4 0.3 0.4
    BP 0 to 1000 1.0 1.5 0.4 0.6
    1000 to 2000 1.6 2.4 0.6 0.9
    2000 to 2500 2.0 3.0 0.8 1.2
    XK -200 to 300 0.2 0.3 0.2 0.5
    300 to 800 0.4 0.6 0.3 0.6
    • Models
      Model Name Description  
      Fluke 754 Fluke 754 Documenting Process Calibrator-HART
       

      Includes:

      • BC7240 battery charger
      • Li-on BP7240 battery pack
      • DPCTrack 2™ Sample Software
      • Instruction manual
      • NIST-traceable calibration report and data
      • Three sets of TP220 test probes with three sets of “extended tooth" alligator clips
      • Two sets AC280 hook clips
      • C799 Soft Field Case
      • USB communication cable, Fluke 754HHC HART communications cable
    • Batteries, Chargers & Adapters
      Model Name Description  
      Fluke BC7240 Fluke BC7240 Battery charger/Eliminator for 75x
      Fluke BP7240 Fluke BP7240 Li-Ion Battery Pack for 75x
    • CarePlans
      Model Name Description  
      Fluke G3P-Group2 Fluke G3P-Group2 Gold CarePlan Fluke Store
      Fluke S3P-Group2 Fluke S3P-Group2 Silver CarePlan Fluke Store
    • Cases & Holsters
      Model Name Description  
      Fluke C700 Fluke C700 Hard Carrying Case Fluke Store
      Fluke C781 Fluke C781 Meter Case Fluke Store
    • Clips
      Model Name Description  
      Fluke AC220 Fluke AC220 SureGripTM Alligator Clips Fluke Store
      Fluke AC280 Fluke AC280 SureGripTM Hook Clips Fluke Store
      Fluke AC285 Fluke AC285 SureGripTM Alligator Clips Fluke Store
    • Compatible Products
      Model Name Description  
      Fluke 750P Fluke 750P Series Pressure Modules
    • Pressure Calibration Kit
      Model Name Description  
      Fluke 700PCK Fluke 700PCK Pressure Calibration Kit
    • Pressure Module, Differential
      Model Name Description  
      Fluke 700P00 Fluke 700P00 Differential Pressure Module
      Fluke 700P01 Fluke 700P01 Differential Pressure Module
      Fluke 700P02 Fluke 700P02 Differential Pressure Module
      Fluke 700P03 Fluke 700P03 Differential Pressure Module
      Fluke 700P04 Fluke 700P04 Differential Pressure Module
    • Pressure Module, Differential Wet
      Model Name Description  
      Fluke 700P22 Fluke 700P22 Differential Pressure Module Wet
      Fluke 700P23 Fluke 700P23 Differential Pressure Module Wet
      Fluke 700P24 Fluke 700P24 Differential Pressure Module Wet
    • Pressure Module, Dual Range
      Model Name Description  
      Fluke 700PD2 Fluke 700PD2 Dual Pressure Module
      Fluke 700PD3 Fluke 700PD3 Dual Pressure Module
      Fluke 700PD4 Fluke 700PD4 Dual Pressure Module
      Fluke 700PD5 Fluke 700PD5 Dual Pressure Module
      Fluke 700PD6 Fluke 700PD6 Dual Pressure Module
      Fluke 700PD7 Fluke 700PD7 Dual Pressure Module
    • Pressure Modules, Absolute
      Model Name Description  
      Fluke 700PA3 Fluke 700PA3 Absolute Pressure Module
      Fluke 700PA4 Fluke 700PA4 Absolute Pressure Module
      Fluke 700PA5 Fluke 700PA5 Absolute Pressure Module
      Fluke 700PA6 Fluke 700PA6 Absolute Pressure Module
    • Pressure Modules, Vacuum
      Model Name Description  
      Fluke 700PV3 Fluke 700PV3 Vacuum Pressure Module
      Fluke 700PV4 Fluke 700PV4 Vacuum Pressure Module
    • Pumps & Accessories
      Model Name Description  
      Fluke 700PMP Fluke 700 PMP Pressure Pump Fluke Store
      Fluke 700HTH-1 Fluke 700HTH-1 Hydraulic Test Hose
      Fluke 700HTP 2 Fluke 700HTP-2 Hydraulic Test Pump
      Fluke 700PRV-1 Fluke 700PRV-1 Pressure Relief Valve Kit Fluke Store
      Fluke 700PTP-1 Fluke 700PTP-1 Pneumatic Test Pump Fluke Store
    • Software
      Model Name Description  
      Fluke 750SW Fluke 750 SW DPC/TRACK2 Software Fluke Store
    • Temperature Accessories
      Model Name Description  
      Fluke 80CJ M Fluke 80CJ-M type J Male Mini-Connectors Fluke Store
      Fluke 80CK M Fluke 80CK-M type K Male Mini-Connectors Fluke Store
      Fluke 80PJ-1 Fluke 80PJ-1 Bead Probe Fluke Store
      Fluke 80PJ-EXT Fluke 80PJ-EXT Extension Wire Kit Fluke Store
      Fluke 80PK 1 Fluke 80PK-1 Bead Probe Fluke Store
      Fluke 80PK 22 Fluke 80PK-22 SureGripTM Immersion Temperature Probe Fluke Store
      Fluke 80PK 24 Fluke 80PK-24 SureGripTM Air Temperature Probe Fluke Store
      Fluke 80PK 25 Fluke 80PK-25 SureGripTM Piercing Temperature Probe Fluke Store
      Fluke 80PK 26 Fluke 80PK-26 SureGripTM Tapered Temperature Probe Fluke Store
      Fluke 80PK 27 Fluke 80PK-27 SureGripTM Industrial Surface Temperature Probe Fluke Store
      Fluke 80PK 8 Fluke 80PK-8 Pipe Clamp Temperature Probe Fluke Store
      Fluke 80PK-9 Fluke 80PK-9 General Purpose Probe Fluke Store
      Fluke 80PK Fluke 80PK-EXT Extension Wire Kit Fluke Store
      Fluke 80PT 25 Fluke 80PT-25 SureGripTM Piercing Temperature Probe Fluke Store
    • Test Leads
      Model Name Description  
      Fluke TL940 Fluke TL940 Mini-Hook Test Leads Fluke Store
      Fluke TL950 Fluke TL950 Mini-Pincer Test Leads Fluke Store
    • Test Probes
      Model Name Description  
      Fluke TP74 Fluke TP74 Lantern Tip Test Probes Fluke Store
      Fluke TP920 Fluke TP920 Test Probe Adapter Set Fluke Store
    • Related Products
      Model Name Description  
      Fluke 750P Fluke 750P Series Pressure Modules
      Fluke 753 Fluke 753 Documenting Process Calibrator
      Fluke 726 Fluke 726 Precision Multifunction Process Calibrator
      Fluke 725 Fluke 725 Multifunction Process Calibrator
      Fluke 721 Fluke 721 Precision Pressure Calibrator
      Fluke 719Pro Fluke 719Pro Electric Pressure Calibrator
      Fluke 719 Fluke 719 Pressure Calibrator
      Fluke 718 Fluke 718 Pressure Calibrator
      Fluke 717 Fluke 717 Pressure Calibrator
    • Manuals
      Title  
      DPC/TRACK Users Manual Download
      DPC/TRACK Installation Guide Download
      753/754 Getting Started Download
      753/754 Users Manual Download
      753/754 User's Manual Supplement Download
      754 Hart Users Guide Download
      DPCTrack2 Getting Started Download
      DPCTrack2 Users Manual Download
      753/754 Calibration Manual Download
      753/754 Calibration Manual Supplement Download
      75X EL Instruction Sheet Download
      753/754 Statement of Memory Volatility Download
      DPC/TRACK Installationsanleitung Download
      DPC/TRACK Guida all'installazione Download
      DPC/TRACK Guide d’installation Download
      DPC/TRACK Guía de instalación Download
      753/754 Getting Started Download
      753/754 入门 Download
      753/754 Getting Started Download
      753/754 Come iniziare Download
      753/754 Getting Started Download
      753/754 Iniciação Download
      753/754 Getting Started Download
      753/754 Mise en route Download
      753/754 Puesta en funcionamiento Download
      753/754 사용자 설명서 Download
      753/754 用户手册 Download
      753/754 Bedienungshandbuch Download
      753/754 Manuale per l’uso Download
      753/754 Руководство пользователяl Download
      753/754 Manual do usuário Download
      753/754 ユーザーズ・マニュアル Download
      753/754 Mode d'emploi Download
      753/754 Manual de uso Download
      754 Hart 사용 설명서 Download
      754 Hart 用户指南 Download
      754 Hart Benutzeranleitung Download
      754 Hart Guida dell’utente Download
      754 Hart Руководство пользователя Download
      754 Hart Guia do usuário Download
      754 Hart Users Guide Download
      754 Hart Guide utilisateurs Download
      754 Hart Guía de uso Download
      753/754 CE Declaration of Conformity Download
    • Brochures
      Title  
      Oil and Gas Downstream Brochure Download
      Oil and Gas Midstream Brochure Download
    • Application Notes
      Title  
      Testing temperature switches with a Fluke documenting process calibrator application note Download
      Calibrating pressure switches with a DPC application note Download
      Fluke 753/754 Windows Driver Downloads Download
      Using the Fluke 726 and custom RTD constants for precision temperature measurement Download
      Using the 754 with a dry block calibrator, eliminate temperature sensor errors in loop calibrations application note Download
      HART transmitter calibration application note Download
      Transmitter calibration Download
      Automated field calibration for the oil and gas industry (.pdf) Download
    • Data Sheets
      Title  
      Fluke 750 Data Sheet Download
×
×