Keeping your world up and running.®

United States / English

Back

« Insulation Testers

Fluke 1587/i400 Current Clamp FC Kit

Includes the 1587 FC 2-in-1 Insulation DMM and the i400 Current Clamp

Fluke 1587 FC 2-in-1 Insulation DMM and i400 Current Clamp
  • Fluke 1587 FC 2-in-1 Insulation DMM and i400 Current Clamp
Overview
Features
Reviews
Specs
Models
Accessories
Resources

  • Includes the 1587 FC 2-in-1 Insulation DMM and the i400 Current Clamp

    The Fluke 1587 FC Insulation Multimeter features four powerful new diagnostic functions through the Fluke Connect Measurements app:

    • Pl/DAR timed ratio tests with TrendIt™ graphs identifies moisture and contaminated insulation problems faster
    • Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time
    • Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
    • Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field with Fluke Connect® Assets

    The Fluke i400 AC Current Clamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.

  • Includes the Fluke 1587 FC 2-in-1 Insulation DMM and the Fluke i400 Current Clamp

    • With the Fluke 1587 FC, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease
    • Use the Fluke i400 with your Fluke 1587 FC to accurately measure AC current without breaking the circuit

    The Fluke 1587 FC 2-in1 Insulation DMM

    • Pl/DAR measurements with TrendIt™ graphs
    • Memory storage through Fluke Connect Measurements app
    • Temperature Compensation through Fluke Connect Measurements app
    • VFD low-pass filter for accurate motor drive measurements
    • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
    • Insulation test voltages 500 V, 1000 V
    • Insulation test: 0.01 MΩ to 2.0 GΩ
    • Insulation test: 0.1 MΩ to 600 MΩ
    • Auto-discharge of capacitive voltage
    • Insulation test smoothing reading
    • Frequency / Capacitance / Diode test / Temperature
    • Min/Max / AC/DC Voltage / DC Millivolts / AC/DC Milliamps
    • Resistance (0.1 Ω to 50 MΩ) / Continuity / Auto power off
    • Three-year warranty / Remote probe, test leads, alligator clips, K-type thermocouple, hard case
    Fluke i400 AC Current Clamp
    • Use with your Fluke 1587 FC to measure 1A AC to 400 A AC
    • 1 mA/Amp output guarantees easy reading
    • CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
    • Specially designed to offer maximum utility in a very compact shape
    • Maximum conductor: Ø 32 mm
    • 1 year warranty

  • Fluke 1587 FC Insulation Multimeter

    Electrical Specifications
    AC voltage measurement
    Range
    600.0 mV Resolution 0.1 mV
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)
    6.000 V Resolution 0.001 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)
    60.00 V Resolution 0.01 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)
    600.0 V Resolution 0.1 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)¹
    1000 V Resolution 1 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(2% + 3)
    Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)¹
    ¹ 1 kHz bandwidth
    Low-Pass Filter Voltage 
    Range
    600.0 mV Resolution 0.1 mV
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
    6.000 V Resolution 0.001 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
    60.00 V Resolution 0.01 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
    600.0 V Resolution 0.1 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
    Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
    1000 V Resolution 1 V
    Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(2% + 3)
    Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
    DC Voltage Measurement
    Range Resolution Accuracy ±(% of Rdg + Counts)
    6.000 V dc 0.001 V ±(0.09% + 2)
    60.00 V dc 0.01 V ±(0.09% + 2)
    600.0 V dc 0.1 V ±(0.09% + 2)
    1000 V dc 1 V ±(0.09% + 2)
    Input impedance  10 MΩ (nominal), <100 pF
    Normal mode rejection ratio  >60 dB @ 50 Hz or 60 Hz
    Common mode rejection ratio  >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)
    Accuracies apply to ± 100% of range
    DC Millivolts Measurement
    Range Resolution Accuracy ±(% of Rdg + Counts)
    600.0 mVdc 0.1 mV ±(0.1% + 1)
    DC and AC Current Measurement
    AC 45 Hz to 1000 Hz
    Range 400 mA
    Resolution 0.1 mA
    Accuracy ±(% of Rdg+Counts) ±(1.5% + 2)¹
    Burden voltage (Typical) 2 mV/mA
    Range 60 mA 
    Resolution 0.01 mA 
    Accuracy ±(% of Rdg+Counts) ±(1.5% + 2)¹
    Burden voltage (Typical) 2 mV/mA
    DC
    Range 400 mA
    Resolution 0.1 mA
    Accuracy ±(% of Rdg+Counts) ±(0.2% + 2)
    Burden voltage (Typical) 2 mV/mA
    Range 60 mA
    Resolution 0.01 mA
    Accuracy ±(% of Rdg+Counts) ±(0.2% + 2)
    Burden voltage (Typical) 2 mV/mA
    Overload 600 mA for 2 minutes maximum
    Fuse protection for mA input 0.44 mA, 1000 V, IR 10 kA
    AC conversion Inputs are ac-coupled and calibrated to the rms value of sine wave input
    Conversions are true-rms responding and specified from 5% to 100% of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms add +(2% reading + 2% FS) typical, for a crest factor up to 3.
    ¹ 1 kHz bandwidth
    Ohms Measurement
    Range Resolution Accuracy +(% of Rdg+Counts)¹
    600.0 Ω 0.1 Ω ±(0.9% + 2)
    6.000 kΩ 0.001 kΩ ±(0.9% + 2)
    60.00 kΩ 0.01 kΩ ±(0.9% + 2)
    600.0 kΩ 0.1 KΩ ±(0.9% + 2)
    6.000 MΩ 0.001 MΩ ±(0.9% + 2)
    50.0 MΩ ² 0.01 MΩ ±(1.5% + 3)
    Overload protection  1000 V rms or dc
    Open circuit test voltage  <8.0 V dc
    Short circuit current  <1.1 mA
    ¹ Accuracies apply from 0% to 100% of range
    ² Up to 80% relative humidity
    Diode Test
    Diode test indication Display voltage drop: 0.6 V at1.0 mA nominal test current:
    Accuracy ±(2% + 3)
    Continuity Test
    Continuity indication Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω
    Open circuit voltage <8.0 V
    Short circuit current 1.0 mA typical
    Overload protection 1000 V rms
    Response time >1 m sec
    Frequency Measurement
    Range Resolution Accuracy ±(% of Rdg+Counts)
    99.99 Hz  0.01 Hz  ±(0.1% + 1)
    999.9 Hz  0.1 Hz  ±(0.1% + 1)
    9.999 kHz  0.001 kHz  ±(0.1% + 1)
    99.99 kHz  0.01 kHz  ±(0.1% + 1)
    Frequency Counter Sensitivity
    600.0 mV ac  V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz  100.0 mV 
    V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz 150.0 mV 
    DC Trigger Levels¹ to 20 kHz² NA
    6.0 V  V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz  1.0 V 
    V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz 1.5 V 
    DC Trigger Levels¹ to 20 kHz² -400.0 mV and 2.5 V
    60.0 V  V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz  10.0 V 
    V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz 36.0 V 
    DC Trigger Levels¹ to 20 kHz² 1.2 V and 4.0 V
    600.0 V  V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz  100.0 V 
    V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz -
    DC Trigger Levels¹ to 20 kHz² 12.0 V and 40.0 V
    1000.0 V  V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz  300.0 V 
    V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz -
    DC Trigger Levels¹ to 20 kHz² 12.0 V and 40.0 V
    ¹ Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy
    ² Usable to 100 kHz with full scale input
    Capacitance
    Range  Resolution  Accuracy ±(% of Rdg+Counts)
    1000 nF  1 nF ±(1.2% + 2)
    10.00 μF  0.01 μF ±(1.2% + 2)
    100.0 μF  0.1 μF ±(1.2% ±90 counts)
    9999 μF  1 μF ±(1.2% ±90 counts)
    Temperature Measurement
    Range  Resolution  Accuracy ±(% of Rdg+Counts)¹
    -40 ° C to 537 ° C  0.1 °C  ±(1% + 10 counts)
    -40 ° F to 998 ° F  0.1 °F  ±(1% + 18 counts)
    ¹ Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument
    Insulation Specifications
    Measurement range 0.01 MΩ to 2 GΩ
    Test voltages 50, 100, 250, 500, 1000 V
    Test voltage accuracy +20%, -0%
    Short-circuit test current 1 mA nominal
    Auto discharge Discharge time <0.5 second for C = 1 μF or less
    Live circuit detection Inhibit test if terminal voltage > 30 V prior to initialization of test
    Maximum capacitive load Operable with up to 1 μF load
    Output Voltage
    50 V (0% to +20%) Display range 0.01 to 6.00 MΩ
    Resolution 0.01 MΩ
    Test current 1 mA @ 50 kΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts)
    Display range 6.0 to 50.0 MΩ
    Resolution 0.1 MΩ
    Test current 1 mA @ 50 kΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts)
    100 V (0% to +20%) Display range 0.01 to 6.00 MΩ
    Resolution 0.01 MΩ
    Test current 1 mA @ 100 kΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts)
    Display range 6.0 to 60.0 MΩ
    Resolution 0.1 MΩ
    Test current 1 mA @ 100 kΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts)
    Display range 60 to 100 MΩ 
    Resolution 1 MΩ
    Test current 1 mA @ 100 kΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(3% + 5 counts)
    250 V (0% to +20%) Display range 0.1 to 60.0 MΩ 
    Resolution 0.1 MΩ
    Test current 1 mA @ 250 kΩ 
    Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts)
    Display range 60 to 250 MΩ 
    Resolution 1 MΩ
    Test current 1 mA @ 250 kΩ 
    Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts)
    500 V (0% to +20%) Display range 0.1 to 60.0 MΩ
    Resolution 0.1 MΩ
    Test current 1 mA @ 500 kΩ 
    Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts)
    Display range 60 to 500 MΩ
    Resolution 1 MΩ
    Test current 1 mA @ 500 kΩ 
    Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts)
    1000 V (0% to +20%) Display range 0.1 to 60.0 MΩ 
    Resolution 0.1 MΩ
    Test current 1 mA @ 1 MΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts)
    Display range 60 to 600 MΩ 
    Resolution 1 MΩ
    Test current 1 mA @ 1 MΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(1.5% + 5 counts)
    Display range 0.6 to 2.0 GΩ 
    Resolution 100 MΩ 
    Test current 1 mA @ 1 MΩ
    Resistance accuracy ±(% of Rdg + Counts) ±(10% + 3 counts)
    General Specifications
    Maximum voltage applied to any terminal and common 1000 V
    Storage temperature -40 °C to 60 °C (-40 °F to 140 °F)
    Operating temperature -20 °C to 55 °C (-4 °F to 131 °F)
    Temperature coefficient 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)
    Relative humidity Noncondensing
    0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F)
    0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F)
    0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)
    Vibration Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
    Radio frequency communication 2.4 GHz ISM Band
    Radio frequency certification FCC: T68-FBLE, IC: 6627A-FBLE
    Electromagnetic Compatibility 
    International IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A
    Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
    Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes.  There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
    Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.
    Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment)
    Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
    USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
    Enclosure protection IEC 60529: IP40 (non-operating)
    Safety
    IEC 61010-1 Pollution Degree 2
    IEC 61010-2-033 CAT IV 600 V / CAT III 1000 V
    Batteries  Four AA batteries (NEDA 15A or IEC LR6)
    Battery life Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
    Size (H x W x L) 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
    Weight 550 g (1.2 lb)
    Altitude Operating 2000 m
    Storage 12,000 m
    Over-range capability 110% of range except for capacitance which is 100%
    Frequency overload protection <107 V Hz
    Fuse protection for mA input 0.44A, 1000 V, IR 10 kA

    Fluke i400 AC Current Clamp

    Specifications
    Nominal current range 400  A
    Continuous current range 1 A - 400 A
    Maximum non-destructive current 1000 A
    Lowest measurable current 1 A
    Basic accuracy 2% + 0.06 A
    (45-400 Hz)
    (% reading + floorspec)
    Useable frequency 5 Hz - 20 kHz
    Output level(s) 1 mA/A
    Safety Specifications
    Safety CAT IV 600 V, CAT III, 1000 V
    Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010
    Mechanical and General Specifications
    Warranty 1 year
    Maximum conductor diameter 32 mm (1.25 in)
    Maximum conductor size (busbar) 750 MCM
    Output cable length 1.5 m (59 in)
    Shrouded banana plugs Yes
    • Models
      Model Name Description  
      FLK-1587/i400 FC Kit Fluke 1587/i400 Current Clamp FC Kit
       

      Includes:

      • Fluke 1587 FC 2-in-1 Insulation DMM
      • Fluke i400 Current Clamp
Top Related Products

Products

Company

Customer Service

Fluke Newsletters Signup
United States / English

Copyright ©1995-2017 Fluke Inc.

Back to top of page