Keeping your world up and running.®

Fluke T5-600/62MAX+/1AC II IR Thermometer, Electrical Tester and Voltage Detector Kit

Overview
Features
Reviews
Specs
Models
Resources
  • This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.

  • Fluke T5 Voltage, Continuity and Current Testers.

    • Automatically measures volts AC and volts DC with precise digital resolution.
    • Displays resistance to 1000 Ω.
    • Easy and accurate OpenJaw™ current measurement.
    • Continuity beeper.
    • Rugged enough to withstand a 10 ft (3 m) drop.
    • 600 V model.
    • Auto off mode to conserve battery life.
    • AC current.
    • Display hold.
    • All inputs of the T5-600 are protected to EN61010-1 CAT III 600V. UL, CSA and VDE listed.

    Fluke 62 MAX+. Small in size. Big on toughness.

    • Dust and water-resistant: IP54 rated.
    • Rugged: 3 m (9.8 ft) drop tested.
    • Ergonomically designed: Completely redesigned for a more natural hand fit.
    • Distance to spot: 12:1.
    • Dual lasers: Identifies area to be measured.
    • Large, backlit display: Makes data easier to read, even in dark areas.
    • C115 Deluxe soft carrying case with shoulder strap.
  • Fluke T5-600 Voltage, Continuity and Current Tester

    Specifications
    Jaw opening 12.9 mm (0.5 in)
    Max wire size 1/0 THHN cable
    Current range AC rms 0 to 100.0 A
    Accuracy AC current (50/60 Hz) 3% ± 3 counts
    AC Response Averaging
    Voltage range AC 0 to 600 V
    Accuracy AC voltage 1.5% ± 2 counts
    Voltage range DC 0 to 600 V
    Accuracy DC voltage 1% ± 1 count
    Resistance range 0 to 1000 Ω
    Continuity beeper threshold On at < 25 Ω, off at > 400 Ω
    Volts indicator LED threshold Guaranteed on by 30 V AC
    Environmental Specifications
    Operating temperature -10°C to 50°C
    Storage temperature -30°C to 60°C
    Humidity (without condensation) 0% to 95% (5°C to 30°C); 0% to 75% (30°C to 40°C);
    0% to 45% (40°C to 50°C)
    Dust/water resistance Yes
    Operating altitude 2000 meters max
    Temperature coefficient 0.1 x (specified accuracy)/°C (< 18°C or > 28°C)
    Safety Specifications
    Overvoltage category CAT III 600 V AC/DC (EN61010-1)
    Agency approvals UL, CSA, and VDE
    Maximum voltage Between any terminal and earth ground
    Mechanical and General Specifications
    Size 30.5 x 51 x 203 mm
    Weight 300 g
    Warranty Two-years
    Battery life 200 hour zinc chloride, 400 hour alkaline
    Battery type 2 x AA
    Low battery indicator Yes
    Current sensor opening 12.9 mm
    Calibration cycle 1 year
    Test leads Type Heavy duty, flexible leads rated for 1000 V use.
    Field replaceable leads terminate in male shrouded banana plugs
    Probes One red, one black.
    Detachable Slim-Reach™ probe tips
    Styles TP1 Slim Reach™ test brobes
    Safety Specifications
    Safety CAT IV 600 V, CAT III, 1000 V
    Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010


    Fluke 62 MAX+ Infrared Thermometer

    Specifications
    Temperature range -30°C to 650°C (-22°F to 1202°F)
    Accuracy ±1.0°C or ±1.0% of reading, whichever is greater
    -10°C to 0°C: ±2.0
    -30°C to -10°C: ±3.0
    Response time (95%) < 300 ms (95% of reading)
    Spectral response 8 to 14 microns
    Emissivity 0.10 to 1.00
    Optical resolution 12:1 (calculated at 90% energy)
    Display resolution 0.1°C (0.2°F)
    Repeatability of readings ±0.5% of reading or < ±0.5°C (1°F), whichever is greater
    Power AA battery
    Battery life 8 hours with laser and backlight on
    Physical Specifications
    Weight 255 g (8.99 oz)
    Size 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
    Operating temperature 0°C to 50°C (32°F to 122°F)
    Storage temperature -20°C to 60°C (-4°F to 140°F), (without battery)
    Operating humidity 10% to 90% RH non-condensing at 30°C (86°F)
    Operating altitude 2000 meters above mean sea level
    Storage altitude 12,000 meters above mean sea level
    IP rating IP 54 per IEC 60529
    Drop test 3 meters
    Vibration and shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
    EMC EN 61326-1:2006 EN 61326-2:2006
    Standards and agency approval Compliance EN/IEC 61010-1: 2001
    Laser safety FDA and EN 60825-1 Class II
    • Models
      Model Name Description  
      Fluke T5-600/62 MAX+ Fluke T5-600/62MAX+/1AC II IR Thermometer, Electrical Tester and Voltage Detector Kit
       

      Includes:

      • Fluke T5-600
      • Fluke 62 MAX+ IR Thermometer
    • Application Notes
      Title  
      A million and one uses for voltage detectors Download
      Lighting the way at Msp: Using the 1520 Megohmmeter for preventative maintenance Download
      Understanding capacitive voltage sensors Download
      When things are tight, reach for the Fluke T5 Download
      Who sets the rules for electrical testing and safety? Download
    • Data Sheets
      Title  
      Fluke 1AC II Data Sheet Download
×