Keeping your world up and running.®

Fluke T2 Voltage and Continuity Tester

This product is discontinued or reclassified

  • Now You Can Get More From a Tester

    The Fluke T2 is a voltage and continuity tester that's designed to work long and hard. There are no settings - just probe the circuit and the T2 will show you whether you're looking at ac volts, dc volts, or an open circuit. You don't even have to turn it on or off! With seven different voltage indicators, it can clearly differentiate between key voltage levels.

    Features at a Glance:

    • LEDs clearly indicate seven ac and seven dc nominal voltage levels
    • Indicates dc voltages as low as 6V
    • DC polarity indicator
    • Compact and rugged_fits in a tool pouch or overall pocket
    • Automatically selects continuity beeper or voltage measurement
    • Can stay connected much longer than solenoid type testers
    • Rugged enough to withstand a 10-foot (3m) drop
    • Protected to 1000V input, for use in CAT III environments
    • Automatically activates and shuts down to conserve battery power
    • Heavy-duty test leads for long life
  • General Specifications
    Electrical Continuity threshold Beeper on at <150,000W, Beeper off at >300,000W
    Input impedance Approximately 1 MW
    AC frequency response 45 Hz to 66 Hz
    Voltage levels U.S. Version
      VAC 24, 120, 208, 240, 277, 480, 600
      VDC 6, 12, 24, 36, 48, 110, 220
    Worldwide Version
      VAC 12, 24, 48, 110, 230, 400, 690
      VDC 6, 12, 24, 36, 48, 110, 220
    Canada Version
      VAC 24, 120, 208, 240, 347, 480, 600
      VDC 6, 12, 24, 36, 48, 110, 220
    Battery Type (2) AA Carbon Zinc
    Life 250 hours
    Test leads Type Fixed. Replaceable by service technician or service center
    Wire Heavy duty, extra flexible with black insulation rated for a breakdown of 1000V
    Probes Shipped with one of two nonremovable tip styles, U.S. (flat blade) or European (4mm); one red, one black
    Environmental requirements Operating temperature -10°C to +50°C
    Storage temperature -30°C to +60°C indefinite
    Humidity 0% to 95% (0°C to 30°C)
    0% to 75% (30°C to 40°C)
    0% to 45% (40°C to 50°C)
    Dust/water resistant  
    Operating altitude 3000m minimum
    Mechanical Size 1.3" H X 1.8" W X 6.3"L (33 mm x 46 mm x 16 mm)
    Weight 7 oz (approximate)
    Safety Maximum operating voltage 1000V ac/dc between any terminal and earth ground (protection only)
    Protection classes Pollution Degree II, Overvoltage Category III per IEC 61010-1
    Agency approvals UL, CSA, and VDE
    Manufacturer's certification CE
    Warranty  1 year
    Calibration  No calibration
    • Model
      Model Name Description  
      Fluke T2 Fluke T2 Voltage and Continuity Tester
      Fluke T2 Voltage and Continuity Tester

      Voltage and Continuity Tester including instruction sheet

    • Manuals
      T2 Calibration Information Download
      T2 Brugsanvisning Download
      T2 Instructieblad Download
      T2 Instruction Sheet Download
      T2 Ohjelehti Download
      T2 Fiche d´instruction Download
      T2 Anleitungsblatt Download
      T2 Foglio di istruzioni Download
      T2 Instruksjonsark Download
      T2 Folha de instruções Download
      T2 Hoja de instrucciones Download
      T2 Anvisningsblad Download
      T2 Instruction Sheet Supplement Download
      T2 Retrofit Kit Instruction Sheet Download
      T2 Retrofit Kit Fiche d´instruction Download
      T2 Retrofit Kit Anleitungsblatt Download
      T2 Retrofit Kit Foglio di istruzioni Download
      T2 Retrofit Kit Hoja de instrucciones Download