Keeping your world up and running.®

Fluke 368 FC Leakage Current Clamp Meter

The Fluke 368 FC true-rms leakage current clamp meter helps you measure small problems before they become large problems, all without taking equipment off line.

Fluke 368 FC Leakage Current Clamp Meter
  • Fluke 368 FC Leakage Current Clamp Meter
  • Fluke 368 FC Leakage Current Clamp Meter with 40 mm jaw for large conductors
  • Fluke 368 FC Leakage Current Clamp Meter send results to your smartphone wirelessly
Overview
Features
Specs
Models
Resources
  • Reduce downtime – Find leakage currents without taking equipment offline.

    The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.

    The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

    The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 368 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.

  • Product overview

    • True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
    • 40 mm jaw opening
    • Highest resolution of 1 μA, measure up to 60 A
    • Selectable filter function removes unwanted noise
    • Max/Min/Average readings and hold function
    • Forward-facing LED worklight for use in dark wiring cabinets
    • Backlit display; auto backlight off and auto power off for extended battery life
    • CAT III 600V safety rating
    • Internal Memory Logging: up to 65,000 measurement points
  • Electrical Specifications
    Measurement function Alternating current
    AC ampere range 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
    mA / A: manual selection
    3 mA / 30 mA / 300 mA: automatic selection
    3 A / 30 A / 60 A: automatic selection
    Range / Resolution 3 mA¹ / 0.001 mA
    30 mA / 0.01 mA
    300 mA / 0.1 mA
    3 A / 0.001 A
    30 A / 0.01 A
    60 A / 0.1 A
    Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)² 3 mA – 30 A
    60 A
    1% + 5 digits
    2% + 5 digits
    Frequency 40 Hz to 1 kHz
    Crest Factor 3
    After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%.
    ¹The minimum value is 10 μA rms.
    ²Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1
    Physical
    Display (LCD) Digital readout: 3300 count
    Display refresh rate 4 times / sec
    Maximum conductor diameter 40 mm
    Dimensions 234 x 101 x 46 mm
    Weight 500 g
    Battery 2 AA, IEC LR6, NEDA 15A, alkaline
    Battery life Expected battery life, without using backlight and spotlight, is more than 150 hours
    Automatic shut-down Meter automatically shuts down after 15 minutes of inactivity
    Safety and Environmental Specifications
    General safety IEC 61010-1: Pollution Degree 2
    Measurement safety IEC 61010-2-032: CAT III 600 V / CAT IV 300 V
    Operating temperature -10 °C to +50 °C
    Storage temperature -40 °C to +60 °C
    Operating humidity Non-condensing (<10 °C)
    90% relative humidity (10 °C to 30 °C)
    75% relative humidity (30 °C to 40 °C)
    45% relative humidity (40 °C to 50 °C)
    Protection class IEC 60529: IP30 (jaw closed)
    Operating altitude 2000 m
    Storage altitude 12000 m
    Current sensor action category IEC 61557-13: Class 2, ≤30 A / m
    Electromagnetic compatibility (EMC)
    International
    IEC 61326-1 Industrial Electromagnetic Environment
    CISPR 11 Group 1 Class B
    Group 1 Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device's own internal functions is essential.
    Class B Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements.
    Korea (KCC): A type of equipment (radio and communication equipment industry)
    Class A This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment.
    USA (FCC): 47 CFR 15 B Subpart. In accordance with section 15.103 provides that the products are considered tax-free device.
    • Models
      Model Name Description  
      Fluke 368 FC Fluke 368 FC Leakage Current Clamp Meter
       

      Included

      • Leakage Clamp Meter
      • Soft case
      • Safety manual
      • Batteries: 2 AA
    • Manuals
      Title  
      368 FC/369 FC Quick Reference Guide Download
      368/369/368 FC/369 FC Calibration Manual Download
      Radio Frequency Data Class A Instruction Sheet Download