Keeping your world up and running.®

Fluke i310s Current Probe

The i310 current probe offered by Fluke can be used to measure both DC and AC current for accurate measurements. Contact us for more information.

Fluke i310s Current Probe
Overview
Specs
Models
Accessories
Resources
  • The i310s current probe is based on Hall Effect technology for use in measurement of both DC and AC current. The i310s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

  • Electrical Characteristics
    Current ranges 30 A and 300 A AC rms or ±45 A and 450 A DC
    Measuring ranges ±45 A and 450 A DC
    AC rms or DC ±45 A and 450 A
    Inrush current 600A AC rms MAX
    Output sensitivity 10 mV/A (30 A)
    1 mV/A (300 A)
    Accuracy (at +23°C) (30 A range) ±1% of reading ±50 mA
    (300 A range) ±1% of reading ±300 mA
    Bandwidth to meet accuracy specification 1 kHz
    Phase shift below 1 kHz < 2 degrees
    Resolution ±50 mA (30 A)
    ±100 mA (300 A)
    Load impedance > 10 k Ohms and ≤100 pF
    Conductor position sensitivity ±1.5% relative to centre reading
    Frequency range (small signal) DC to 20 kHz (-3 dB)
    Phase shift below 1 kHz < 2°
    Temperature coefficient ±0.1% of reading / °C
    Power supply 9 V Alkaline, MN1604/PP3
    Battery life 30 Hours, low battery indicator
    Working voltage (see Safety Standards section) 300 V AC rms or DC
    General Characteristics
    Maximum conductor size 19 mm diameter
    Output connection Safety BNC connector
    Supplied with safety 4mm adaptor
    Output zero Manual adjust via thumbwheel
    Cable length 2 metres
    Operating temperature range -10 to +50°C
    Storage temperature range (with battery removed) -20 to +85°C
    Operating humidity 15% to 85% (non-condensing)
    Weight 250 g
    Safety Standards
    BS EN 61010-1 2001
    BS EN 61010-2-032 2002
    BS EN 61010-031 2002
    300 Vrms, Category III, Pollution Degree 2  
    EMC standards BS EN 612361998 +A1, A2, and A3
    Use of the probe on un-insulated conductors is limited to 300 V AC rms or DC and frequencies below 1 kHz
    • Model
      Model Name Description  
      Fluke-i310s Fluke i310s Current Probe
      Current Probe
    • Compatible Products
      Model Name Description  
      Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes
      Fluke 123 Fluke 123 Industrial ScopeMeter® Hand Held Oscilloscope
      Fluke 123/S Fluke 123/S Industrial ScopeMeter® Hand Held Oscilloscope
      Fluke 124 Fluke 124 Industrial ScopeMeter® Hand Held Oscilloscope
      Fluke 124/S Fluke 124/S Industrial ScopeMeter® Hand Held Oscilloscopes with SCC120 kit
      Fluke 125 Fluke 125 ScopeMeter® Oscilloscopes
      Fluke 125/S Fluke 125/S ScopeMeter® Oscilloscopes with SCC120 kit
      Fluke 434 II Basic Fluke 434 Series II Basic Energy Analyzer
      Fluke 434 Series II Fluke 434 Series II Energy Analyzer
      Fluke 435 Series II Basic Fluke 435 Series II Basic Power Quality and Energy Analyzer
      Fluke 435 Series II Fluke 435 Series II Power Quality and Energy Analyzer
      Fluke 438-II Power Quality and Motor Analyzer
    • Manuals
      Title  
      i310S 使用说明单 Download
      i310S Instruction Sheet Download
      i310S Fiche d´instruction Download
      i310S Anleitungsblatt Download
      i310S Foglio di istruzioni Download
      i310S Folha de instruções Download
      i310S Hoja de instrucciones Download
      i310S Instruction Sheet Supplement Download