Keeping your world up and running.®

Fluke FTPL SureGripTM Fused Test Probes and Lead Set

Fluke FTPL SureGrip Fused Test Probes and Lead Set
Overview
Features
Specs
Models
Accessories
  • In response to new ESA guidelines, Fluke introduces test probes with built-in fuses for additional measurement protection. And, if the probe fuse does blow, these probes will still allow the meter to indicate live voltage helping to prevent a possible misreading of no voltage present. The new modular FTP probes can mount onto any Fluke modular lead format. The FTPL set includes Fluke TL224 modular leads with the fused test probes. Rated to CAT III 1000 V, these probes also have removable sheathed tips for additional safety.

    • Built-in fuses for additional measurement protection
    • Probes allow indication of live voltage even with blown fuse, helping to prevent the user from thinking no voltage is present
    • 2 mm threaded probe tips include removable 4 mm lantern-style spring contacts and removable GS38 insulated IC caps for probing closely spaced leads
    • Operating temperature – 20°C to 50°C (-5°F to 120°F)
    • CAT III 1000 V, CAT IV 600 V, 10 A rating
    • FTPL Fused Test Probe and Lead Set includes Fluke TL224 test leads
    • Probes allow indication of live voltage even with blown fuse for added security1
    • Built-in 1000 V, 11 A fuses with 20 kA interrupt rating
    • 2 mm threaded probe tips include removable 4 mm lantern-style spring contacts and removable GS38 insulated IC caps for probing closely spaced leads
    • Operating temperature -20°C to 50°C (-5°F to 120°F)
    • CAT III 1000 V, CAT IV 600 V, 10 A rating, Pollution Degree 2
    • Recommended for use with Fluke modular TL224 SureGrip™ silicone test leads and compatible with most modular test leads
    • Replace fuse by unscrewing probe handle at finger guard. Use only Fluke fuse part number 803293.
    • Current mode is non-functional with blown fuse
    • FTPL Fused Test Probe and Lead Set includes Fluke TL224 test leads

    1. Voltage readings with blown fuse are approximate and vary with the meter impedance. Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe. See explanation below under "DMM Input Impedance". Current mode is non-functional with blown fuse.

    • Model
      Model Name Description  
      Fluke FTPL Fluke FTPL SureGripTM Fused Test Probes and Lead Set
      SureGrip Fused Test Probes and Lead Set
    • Test Leads, Probes & Clips
      Model Name Description  
      Fluke FTPL 1 Fluke FTPL-1 Fused Test Probe Set with Test Leads Fluke Store