Keeping your world up and running.®

  • External Vibration Sensor for the 805 Vibration Meter
    The Fluke 805ES is an external vibration sensor that is ideal in situations for which it is either difficult or impractical to use the onboard vibration sensor tip of the 805 Vibration Meter. The 805ES allows you to take measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in out-of-reach places where it is difficult to apply sufficient manual pressure to the 805 Vibration Meter.

    • Low-profile 90-degree sensor body allows the sensor to get into tight spots
    • Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
    • Powerful "U" shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
    • Rugged, sealed cable connector with strain relief tail reduces cable wear 
    • Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
    • Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter
  • Performance
    Measurement range 7 g pk (68.7 m/s² pk)
    Frequency range 0 to 6000 cpm (0 to 100 Hz)
    Relay 3A Form C 480 VAC
    Relay (Contacts) (DPDT) Normally open / closed
    Temperature range (Operating) -13 to 140°F (-25 to 60°C)
    Enclosure rating IP66
    Size (Width x Height x Depth) 4.35 x 3.30 x 4.35 in (110.5 x 83.8 x 110.5 mm)
    Weight 2.5 lb (1.134 kg)
    Sensing element Magnet
    Housing material Aluminum alloy
    Electrical connector Screw terminals
    Screw terminal wire size 24-14 AWG (0.2 - 2.5 mm²)
    Cable input 3/4-14 NPT
    Mounting hole size 0.25 in (6.4 mm)
    Sensing geometry Inertial element
    • Model
      Model Name Description  
      Fluke 805ES Fluke 805ES
      External Vibration Sensor for 805 Vibration Meter
    • Compatible Products
      Model Name Description  
      Fluke 805 FC Fluke 805 FC Vibration Meter
      Fluke 805 Fluke 805 Vibration Meter