EVERETT, Wash. – Fluke Corporation, the global leader in portable electronic test and measurement technology, has introduced the industry’s most advanced, capable and comprehensive family of clamp meters, designed to meet every requirement for testing and maintaining electrical systems, industrial equipment and controls, and commercial and industrial heating, ventilation and air conditioning (HVAC) equipment.
With this new family of clamp meters, Fluke provides a range of state-of-the-art features to meet even the most demanding requirements for flexibility, safety and performance.
These revolutionary and innovative test tools include:
Every clamp meter in the family is improved: They feature thinner, smaller jaws for easier use inside crowded equipment cabinets, large backlit displays, True RMS standard and improved overmolding for easier handling and improved survival if dropped.
Safety ratings too are improved. The Fluke 381, 376, 375, 374 and iFlex current probes are rated for safe use in hazard category IV (CAT IV) 600 V environments (CAT IV 600 V, CAT III 1000 V) as defined by safety regulators in the US, Canada and Europe. The Fluke 373 is rated CAT IV 300 V, CAT III 600 V. A rating of CAT IV 600 V is required for use in outdoor environments.
The new Fluke family of clamp meters includes:
Fluke 381 Remote Display True RMS AC/DC Clamp Meter - The Fluke 381 is a full-featured clamp meter with an important extra; users can remove the detachable wireless display for even more flexibility, convenience and safety. One technician can do jobs that used to require two - clamp the Fluke 381 around a conductor, remove the display, then close the equipment cabinet or move across the room to operate controls - all while watching real-time readings. It includes the new iFlex flexible current probe (see below). US list price is $498.95.
Fluke 376 True RMS AC/DC Clamp Meter with iFlex™ - With the new Fluke 376 Clamp Meter, users will be ready for any measurement challenge. Designed for the toughest industrial environments, it measures current up to 2500 A AC and 1000 A DC and can troubleshoot even the noisiest motors and drives. With true-rms ac voltage and current measurements, min/max/average and inrush recording, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes. The Fluke 376 includes the new iFlex flexible current probe (see below). The Fluke 376 is the direct replacement for the Fluke 337. US list price $374.95.
Fluke 374 and 375 True RMS AC/DC Clamp Meters - The new Fluke 374 and 375 clamp meters offer improved performance perfect for many current measurement situations. With True RMS AC voltage and current measurements, the Fluke 374 and 375 can read up to 600 V and 600 A in both AC and DC modes and handle min/max, average and inrush recording. Both are compatible with the new iFlex™ flexible current probe (sold separately). Ideal in an industrial environment, the Fluke 375 also comes with R Range, frequency to 500 Hz, mV DC, and integrated low pass noise filter. US list price for the Fluke 375 is $299.95; for the Fluke 374, $259.95.
Fluke 373 True RMS AC Clamp Meter - The new Fluke 373 basic clamp meter offers improved performance and maximum value for price-sensitive users. It is perfect for many AC-only current measurement applications. With True RMS AC voltage and current measurements and inrush, the Fluke 373 reads up to 600 A ac and 600 V AC or DC. US list price $179.95.
iFlex i2500-18 and i2500-10 Flexible Current Probes - The new Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A AC while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error-prone scaling factors. The large coil allows users to reach around large or awkward-shaped conductors, while the small 0.3 inch profile allows the coil to reach between tightly-packed cables and improves access in crowded spaces. Their six-foot cord allows measurement at a distance from the conductor, making it easier to view the readings. Available in 25 cm (10 in) and 45 cm (18 in) sizes and included with the Fluke 381 and Fluke 376 Clamp Meters; compatible with Fluke 375 Clamp Meters. US list price, either model, is $98.95.
For more information on the entire new Fluke clamp line, go to Clamp Meters.
For more information on Fluke tools and applications, or to find the location of your nearest distributor, contact Fluke Corporation, P.O. Box 9090, Everett, WA USA 98206, call (800) 44-FLUKE (800-443-5853), fax (425) 446-5116, e-mail email@example.com or visit the Fluke Web site at http://www.fluke.com.
Fluke Corporation is the leader in compact, professional electronic test tools. Fluke customers are technicians, engineers, electricians, metrologists and building diagnostic professionals who install, troubleshoot, and manage industrial electrical and electronic equipment and calibration processes for quality control as well as conducting building restoration and remediation services. In the past five years, Fluke tools won more than 50 industry awards, including Test and Measurement World Best in Test, Control Engineering Engineer’s Choice, and Plant Engineering Product of the Year. Fluke is a registered trademark of Fluke Corporation in the United States and/or other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners.